完善资料让更多小伙伴认识你，还能领取20积分哦， 立即完善>
3天内不再提示
|
HI：我最近更新了XC16从1.30版到1.33版，有机会使用所有优化程序进行60天免费试用。我想你必须在安装时做这件事，这基本上是原因。当我第一次安装MPLABX时，XC16版本1.30是同时出现的，并且我可以单独为每个项目文件设置优化级别，并且注意到它对优化的影响。自由的水平…但那一次，我没有对专业版的免费试用做任何事情。在安装和激活新版本的时候，我找不到一种方法来为单个文件设置优化，但是已经找到了一种方法来“在全球范围内”进行一个项目，但是它没有任何效果。OpDes包括MDDFS和图像解码器库，以及一个大型程序编译完全相同的程序和数据大小，所以我看不到任何好处，所有五个优化级别。此外，XC16版本1.33编译代码大于1.30个字500个字（没有）幸运的是，版本1.30仍然可以用于保存，但是我仍然无法找出如何为各个项目文件单独设置级别（即使IDE本身还没有被更新）。这里有什么我忽略的吗？一瞬间，我就没有理由升级到PRO，甚至更新编译器。这些是VC16版本1.30的截图，以及XC16版本1.33的两种不同的优化选项，所有编译的完全相同的项目都有问题。
以上来自于百度翻译 以下为原文 Hi :) I have recently updated XC16 from version 1.30 to 1.33 to have the opportunity to use all optimisations for the 60 day free trial. I think you have to do that at install time, and that was basically the reason. When I first installed MPLABX, XC16 version 1.30 is what came with it at the same time, and I was able to set optimisation levels for each project file individually, and noticed the effect that it had for the optimisation levels that come for free... but that time I didn’t do anything about the free trial of the pro version. Upon installing and activating the new version I have not been able to find a way to set optimisation for individual files, but have found a way to do it “globally” for a project, but it has no effect at all. The same project which includes MDDFS and Image Decoder libraries, as well as a large program compiles to exactly the same program and data size, so I’m not seeing any benefit at all with all five optimisation levels. Furthermore, XC16 version 1.33 compiles the code to 500 words larger than 1.30 did (no matter what the settings). Fortunately version 1.30 is still available to use for that saving, but I still can’t find out how I set levels for various project files individually (even though the IDE itself has not been updated. Is there anything I’ve overlooked here? A the moment there would be no reason I see to upgrade to pro, or even update the compiler. These are screenshots of VC16 version 1.30, and two different optimisation options with XC16 version 1.33, all compiling the exact same project in question. https://photos.app.goo.gl/OETohtqJPxUrZcqR2 
0
|
|
相关推荐
3个回答
|
|
|
在我看来，全局优化在源文件或文件夹属性中的某个地方被克服了。检查文件夹和文件的各个编译器设置。是否可以通过仅导入源文件来启动新项目以避免丢失的不必要设置？
以上来自于百度翻译 以下为原文 It seems to me the global optimization is overrided somewhere in source file's or folder's properties. Check individual compiler settings for folders and files. Is it possible to start a new project by importing only the source files to avoid missed unwanted settings? |
|
|
|
|
|
您好，很抱歉离开这么长时间来回复，但我通过编辑优化字段Fix.xml进行了工作。这是一个暂时的解决办法，因为我认为IDE可以重写，但我可以备份它，现在就可以了。干杯，Brek。
以上来自于百度翻译 以下为原文 Hello, Sorry for leaving so long to reply, but I got it working by editing the optimisation fields in configuration.xml. This is a temporary fix because I think this can be rewritten by the IDE, but I can back it up, so will do for now. Cheers, Brek. |
|
|
|
|
|
|
|
|
|
|
只有小组成员才能发言，加入小组>>
5250 浏览 9 评论
2037 浏览 8 评论
1958 浏览 10 评论
请问是否能把一个ADC值转换成两个字节用来设置PWM占空比？
3218 浏览 3 评论
请问电源和晶体值之间有什么关系吗？PIC在正常条件下运行4MHz需要多少电压？
2266 浏览 5 评论
788浏览 1评论
680浏览 1评论
有偿咨询，关于MPLAB X IPE烧录PIC32MX所遇到的问题
609浏览 1评论
PIC Kit3出现目标设备ID(00000000)与预期的设备ID(02c20000)不匹配。是什么原因
685浏览 0评论
582浏览 0评论
/7 
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
1075
评论
淘帖
1175
