采用PIC18F97J60的Picdem net 2开发板

亲爱的朋友们，我需要你们的帮助。我有PICDEM网2 DEV板（DM163024）和PIC18F97 J60微处理器。我对嵌入式系统有很多新的尝试，我尝试用MPLAB X IDE V4.05，用XC8V1.45编译器编译Microchip TCP/IP堆栈演示源代码，以及MPLAB ICD3在电路调试中。格尔。我阅读了这个板的所有PDF文件，以及PIC本身。在我看来，我的XC8编译器有些问题，因此，我尝试用C18 V3.47和MPASMV5.76构建它，但是消息是相同的。没有什么问题，董事会本身，它的工作与一个预先建立的源代码，我可以ping它，我可以到网站的IP显示在LCD屏幕上，我也可以上传一个MPFS图像太我自己的规格。所以我需要你帮我解决这个错误。



      以下为原文

    Dear forumers i need your help.

I have the PICDEM net 2 DEV BOARD (DM163024) with PIC18F97J60 micro processor.
Iam new to the embeddem systems as many others, i try to compile the Microchip TCP/IP stack demo source code with MPLAB x ide v4.05, with XC8v1.45 Compiler.

And an MPLAB ICD3 In-Circuit Debugger. I read all of the PDF file for this board, and for the PIC itself. It seems to me that something wrong with my XC8 Compiler, and because of that, i tried to build it with C18 v3.47 and with mpasmv5.76 but the message is the same. There is nothing wrong with the board itself, its working properly with a prebuilded source code, i can ping it, i can go to the site with the IP showed in the LCD screen and i can upload an MPFS image too with my own specifications. So i need you to help me in this particular error.