是否可以使用ENA网络分析仪系列进行窄带脉冲RF测量？

亲爱的APL，很抱歉，ENA系列VNA仅支持宽带脉冲RF测量。
最小脉冲宽度通常为5 usec，如下面的应用笔记（第28页）中所述。
http://literature.cdn.keysight.com/litweb/pdf/5990-9974EN.pdf



     以下为原文

  Dear APL,

I am sorry but ENA series VNA only support wide band pulsed RF measurement.
Minimum pulse width is typically 5 usec as noted in the application note below(page 28).
http://literature.cdn.keysight.com/litweb/pdf/5990-9974EN.pdf

谢谢Takeshio我想知道安捷伦支持窄带脉冲测量的VNA模型。
此外，如果有关于此方法的任何应用说明/演示，我将非常感激。



     以下为原文

  Thank you Takeshio

I would like to know VNA models from Agilent that support Narrow band pulse measurements. Also, I would be very much grateful if there were any application notes/demonstrations regarding this method.

亲爱的APL，我推荐使用PNA / PNA-X和选项008进行窄带RF脉冲测量。
http://na.support.keysight.com/pna/help/latest/Applications/Narrowband_Pulsed_Application.htm http://www.keysight.com/en/pd-1844139-pn-N5242A/pna-pulsed-rf-measurement
-capability-option-008？nid = -33186.934429＆amp; cc = US＆amp; lc = eng以下是可以帮助您的应用笔记。
使用PNA / PNA-X进行脉冲操作中的有源器件表征 - 应用笔记http://literature.cdn.keysight.com/litweb/pdf/5990-7781EN.pdf PNA - 使用宽带和窄带的脉冲射频S参数测量
检测（AN 1408-12）http://literature.cdn.keysight.com/litweb/pdf/5989-4839EN.pdf



     以下为原文

  Dear APL,

I recommend PNA/PNA-X with option 008 for narrow band RF pulsed measurement.
http://na.support.keysight.com/pna/help/latest/Applications/Narrowband_Pulsed_Application.htm
http://www.keysight.com/en/pd-1844139-pn-N5242A/pna-pulsed-rf-measurement-capability-option-008?nid=-33186.934429&cc=US&lc=eng



Here are application notes that will help you.

Active Device Characterization in Pulse Operation Using the PNA/PNA-X - Application Note 
http://literature.cdn.keysight.com/litweb/pdf/5990-7781EN.pdf

PNA - Pulsed-RF S-Parameter Measurements Using Wideband and Narrowband Detection (AN 1408-12) 
http://literature.cdn.keysight.com/litweb/pdf/5989-4839EN.pdf