[经验]

Klein VDV226-110 Pass-Thru模块化压接器

2018-10-30 14:29:52

1223 连接器电缆

模块化压接应该相对容易，但即使是专业安装人员也有时会遇到麻烦。
传统上，在安装模块化连接器时，安装人员会切断电缆并将外护套剥去建议的距离。
这个问题是单根电线很少彼此齐平。
当电缆插入连接器时，不均匀切断的电线要么部分端接，要么根本不端接，最多连接不良。
Klein Tools VDV226-110（1742-1262-ND）Pass-Thru Crimper通过在按下IDC端子的同时修剪电线解决了这个问题。
传统的模块化连接器具有封闭端。
Klein的Pass-Thru系列模块化连接器允许安装人员将电线拉伸，从而确保与所有8根电线的正确连接。
要通过Randall Restle了解新产品发现，他将介绍Klein Tools Pass-Thru Crimper，请单击此处。

以上来自于谷歌翻译

以下为原文

Modular crimping is something that should be relatively easy, yet even professional installers seem to have trouble at times. Traditionally when installing modular connectors, the installer would cut the cable and strip back the outer jacket the recommended distance. The problem with this is the individual wires are rarely cut flush with one another. When the cable is inserted into the connector, unevenly cut wires are either partially terminated or not terminated at all, making a bad connection at best.
Klein Tools VDV226-110 (1742-1262-ND) Pass-Thru Crimper solves that problem by trimming the wires while pressing the IDC terminals in to place. Traditional modular connectors have a closed end. Klein’s Pass-Thru series of modular connectors allow the installer to run the wires wild, thus ensuring proper connectivity to all 8 wires.
To see the New Product Discovery with Randall Restle where he introduces the Klein Tools Pass-Thru Crimper, click here.