N5416 USB测试应用程序无法正常工作

嗨，我对安捷伦N5416 USB测试应用感到非常沮丧。
我正在尝试测试HighSpeed设备。
我已将我的DUT放入测试数据包，但是当我在通道1上实际使用1132差分探头时，应用程序一直在抱怨好像找不到信号，使用通道2和通道3。我已经更新了
我的MSO9254A上的所有内容都是最新的： - infiniium 5.10 - USB测试应用程序3.90令人沮丧的是考虑到有多少版本，但SW版本中的内容往往会破坏它。
我们上一次成功进行USB兼容性测试的是infiniium 3.10和USB测试应用3.71。
不幸的是，我们不得不升级到win7，然后升级infiniium和所有其他软件。
当我查看infiniium发行说明时，我对软件版本没有信心。
有人可以帮忙吗？



     以下为原文

  Hi,

I've been quite frustrated with Agilent N5416 USB Test App.  
I'm trying to test HighSpeed Device. I've put my DUT into test packet, but the app keeps complaining as if it couldn't find the signal, to use channel 2 and channel 3, when I'm actually using 1132 differential probe on channel 1.

I've updated everything on my MSO9254A to the latest:
- infiniium 5.10
- USB test app 3.90

it's frustrating considering how many releases into this but something in the SW releases tends to break it. the last time we did a successful USB compliance testing was with infiniium 3.10 and USB test app 3.71. unfortunately, we had to upgrade to win7, then upgrading infiniium and all other software.  

when I look at the infiniium release notes, I don't feel confidence of the software releases.

could anyone help?