安捷伦逻辑分析服务agLogicSvc.exe没有响应

嗨，这或多或少是关于系统中agLogicSvc.exe行为的一般性问题。
多年来，我在许多分析仪中看到了这一点，并且从未理解问题的真正根源。
以下是描述：在上电期间，逻辑分析仪信息中心将显示黄色圆圈并显示“Local Analyzer is initializing”。
此消息将永远保留在那里（至少在一夜之间）并且agLogicSvc不会初始化该单元。
重新启动系统有时会有所帮助，但必须完全关闭（不重新启动操作系统）才能恢复。
卸载逻辑分析器应用程序并重新安装它有助于恢复框架（信息中心将显示绿色圆圈）。
Windows更新或加电后，设备将再次中断，而不是初始化。
在删除应用程序期间，脚本将挂起尝试删除agLogicSvc并最终失败。
无法使用Windows服务管理停止agLogicSvc。
为什么会这样？
（软件冲突，硬件，FPGA加载，SBP2驱动程序，Windows）我见过的逻辑分析仪应用程序的模型如下：1690A / AD系列1682A / AD系列16802系列正在删除Application.png9.3 KB2014-09-14_143835。
png2.0 KB



     以下为原文

  Hi,

This is more or less a general question regarding the behavior of agLogicSvc.exe in a system. Over the years I have seen this in a number of analyzers and never understood the real root of the problem. Here is the description:

During power up the logic analyzer Info Center will display a Yellow circle and read "Local Analyzer is initializing". This message will stay there forever (at least overnight) and the agLogicSvc not initialize the unit. Rebooting the system sometimes helps but it has to be shut down completely (no restarts of the OS) for it to recover.

Uninstalling the Logic Analyzer application and reinstalling it helps and restores the frame (Info Center will display a Green circle). After windows updates or power ups the unit will break again and not initialize. During application removal the script will hang trying to remove the agLogicSvc and eventually fail. The agLogicSvc can't be stopped using the Windows Services Management.

Why this behavior? (software conflicts, hardware, FPGA loading, SBP2 Driver, Windows )

The models I have seen the logic analyzer application acting like this are:

1690A/AD Series
1682A/AD Series
16802 Series   
附件

• Logic Analyzer Error.png9.5 KB
• Removing Application.png9.3 KB
• 2014-09-14_143835.png2.0 KB