完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
大家好!
我想在我的3D打印机中更换普通的6mm瞬时触觉按钮开关,我可以用最好的质量。 Monoprice Mini Delta中的开关用于自动校准,我已经不得不更换一个。 当我想到他们的质量以及我将要为课程购买更多的事实时,我觉得用一些可以持续更长时间的东西替换它们是个好主意。 非常感谢任何推荐,谢谢! 像这个。 https://www.digikey.com/product- ... 486-3465-ND/2643951 以上来自于谷歌翻译 以下为原文 Hello everyone! I would like to replace the common 6mm momentary, tactile button switches in my 3D printer with the best quality ones that I can. The switches in the Monoprice Mini Delta are used for auto-calibration and I’ve allready had to replace one. When I think about their quality and the fact that I am going to purchasing many more for classes, I feel like it would be a good idea to replace them all with something that would last a lot longer. Any recomendations would be greatly appreciated, thank you! Like this one. https://www.digikey.com/product- ... 486-3465-ND/2643951 |
|
相关推荐
2个回答
|
|
你好,
感谢您的要求。 Schurter 486-3465-ND的开关是一款优质的开关。 它被评定为100,000次循环。 我们的另一个类似选择是来自Apem。 它是679-2411-1-ND 同样,这个也将有100,000个周期。 我希望这会帮助你。 保罗。 以上来自于谷歌翻译 以下为原文 Hello, Thank you for your request. The switch from Schurter 486-3465-ND is a good quality switch. It is rated to 100,000 cycles. Another similar option we do have is from Apem. it is 679-2411-1-ND Again this one also will have 100,000 cycles. I hope this will help you out. Paul. |
|
|
|
这让我想到了我认为我需要的东西。
非常感谢Paul! 以上来自于谷歌翻译 以下为原文 That led me to what I think I need. Thank you so much Paul! |
|
|
|
只有小组成员才能发言,加入小组>>
3474 浏览 3 评论
511浏览 1评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-12-18 16:05 , Processed in 1.152176 second(s), Total 101, Slave 84 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号