interrupt_manager.h无法使用XC 2.0进行编译

嗨，我有新的项目开始与PIC18F25K50，MCC版本3.55.1，MPLABX版本4.20。在MCC中，我只设置了振荡器频率，我添加了MLA USB设备Lite，我使用了在HTTPS://www. MigCHIP.COM/FUMMS/M1049 605.ASPX中描述的解决方案，并由此产生了中断的中断管理器。同样的问题只是在MPLABX中启动一个新的项目，使用“样本/微芯片嵌入式/PIC18C模板”作为基础，并且我得到相同的错误。解决方法是手动编辑行到：ValuyAySuffTyter（）中断程序管理器（BULL）；我的问题是，你们不是有一些自动化测试吗？你怎么能释放出一种根本不适合的产品呢？是否有一些产品的版本，我可以安全地一起使用，这真的有用吗？我有点盲目地认为，如果我只是把“最新”的东西都行，我就不会有任何问题，但我甚至不得不应用前面提到的解决办法。这些bug什么时候会被修复？



      以下为原文

    Hi, I have newly started project with PIC18F25K50, MCC version 3.55.1, MPLABX version 4.20. In MCC, I have set up only oscillator frequency, I added MLA USB Device Lite, I used workaround described in https://www.microchip.com/forums/m1049605.aspx and resulting generated interrupt_manager.h fails to compile on the following line:

void interrupt INTERRUPT_InterruptManager(void);

I can reproduce the same problem just by starting a new project in MPLABX, using "Samples/Microchip Embedded/PIC18 C Template" as a base and I get to the same error. The workaround is to manually edit the line to:

void __interrupt() INTERRUPT_InterruptManager(void);

My question is, don't you guys have some automated tests? How can you release products, which just do not fit together at all? Is there some table of versions of your products I can safely use together, which actually work? I kind of blindly assumed, that if I just duwnload "the latest" of everything, I will not have any problems, but I even had to apply the earlier mentioned workaround. When will these bugs be fixed?