关于MICO智能硬件的问题1 - 问答 - 电子技术论坛 - 最好最受欢迎电子论坛!

关于MICO智能硬件的问题1

wangxd5429 ( 楼主 ) 2017-2-15 09:04:06  只看该作者 倒序浏览
各位高手,小弟正在使用MICODER集成开发环境向庆科的micokit 3165开发板烧写程序,烧写过程中出现“download failed”。请教其中的原因,谢谢!

4个回复

micolover 发表于 2017-2-17 10:25:03
下载失败请把build里的log文件放出来( ]0 L: Y  l8 b% d* z+ e
& y- ^+ f- B, ]; w8 e( N5 e5 a
新手请先查阅使用手册,和教学视频http://edu.mico.io/
wangxd5429 发表于 2017-2-24 09:55:53
谢谢micolover
wangxd5429 发表于 2017-2-24 09:56:25
谢谢micolover
wangxd5429 发表于 2017-3-9 10:47:21
LOG文件内容:; i7 g( D( W. b/ _: t2 }
Open On-Chip Debugger 0.9.0 (2016-10-20-16:28)
* {* |* l9 r8 _% ~6 GLicensed under GNU GPL v2
& H; @4 x0 m# E6 s: bFor bug reports, read
, A9 D$ m- d  a8 G% K        http://openocd.org/doc/doxygen/bugs.html
2 v6 L5 a: v0 @* ^; M0 q1 r2 ~Info : JLink SWD mode enabled  u5 l2 g" ]) w1 e+ G1 N- @
swd
" a* ^' n( U( K/ ]& xadapter speed: 10000 kHz
) [% m+ q9 X# |' J9 dadapter_nsrst_delay: 100
- m% U+ v  _, t/ g; g6 ]# H: Padapter_nsrst_delay: 1005 s3 a% G- D: l7 Q; y: e  l8 {- _: f
none separate  I0 R7 n+ v! o5 R3 P/ J
cortex_m reset_config sysresetreq/ Q# b' s+ `; _
jtag_init9 I) r: Y! D/ J
sflash_erase
5 \4 J2 R8 i2 \5 F5 c0 [1 NError: libu***_open() failed with LIBUSB_ERROR_NOT_SUPPORTED) L; M7 Q6 K, X
Error: Cannot find jlink Interface! Please check connection and permissions.$ C' `$ N( L( S
6 Q# \0 g& y3 O# b, r  Y
Open On-Chip Debugger 0.9.0 (2016-10-20-16:28)! ~$ z- d; G/ p$ b
Licensed under GNU GPL v2& A1 B: g# K' u% {5 i1 `* v
For bug reports, read/ \$ W2 x5 E3 a$ N7 k9 ?
        http://openocd.org/doc/doxygen/bugs.html
0 Y6 [" a, z7 S, H" jInfo : JLink SWD mode enabled- H& \0 a9 f! G. R  F
swd
. i1 x( S: P9 g$ O+ tadapter speed: 10000 kHz4 |# D3 I+ D- D; |( z
adapter_nsrst_delay: 1001 j: Y1 F3 j6 s+ k1 U
adapter_nsrst_delay: 100' s; ~7 i2 k5 r" {( R. v
none separate$ x: _, g* z9 d) d- {1 j3 X! G1 T7 W9 C
cortex_m reset_config sysresetreq
+ N% i7 T6 Y% Q1 E# j1 I* [jtag_init& [& o4 e6 ~+ T1 `
sflash_erase+ v9 u9 i0 P2 c/ ]7 z7 R% |
Error: libu***_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
  t: w0 I4 d3 k0 c- H# KError: Cannot find jlink Interface! Please check connection and permissions.1 Y! A9 A( x6 @3 [& j* X

+ c- ~. h4 T" r  N4 y, aOpen On-Chip Debugger 0.9.0 (2016-10-20-16:28)2 h  G: C) [4 Z& A% D
Licensed under GNU GPL v2
$ i; o) t( E' G5 A$ }For bug reports, read2 N( u4 D9 v2 N( h5 e$ F
        http://openocd.org/doc/doxygen/bugs.html& T) {: k# ^# a& @
Info : JLink SWD mode enabled$ d% W% c- R6 |
swd
* Z6 F: L& t/ v  j1 Madapter speed: 10000 kHz) [3 W' C! Z( t0 }" ~5 Y0 d
adapter_nsrst_delay: 100. e! y2 Z: {1 K* K* n
adapter_nsrst_delay: 100" {% j$ x3 T1 n3 ^0 s7 R
none separate$ G, ?8 m, K; w0 K1 P' }, Y
cortex_m reset_config sysresetreq
- B. x. Y) B% njtag_init
% }: I$ M& w- w- \4 Vsflash_erase- w% Y8 U2 `1 y+ C8 Y3 a1 p
Error: libu***_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
, E) ]3 t# t; dError: Cannot find jlink Interface! Please check connection and permissions.
您需要登录后才可以回帖 登录 | 注册

本版积分规则


关闭

站长推荐上一条 /9 下一条

小黑屋|手机版|Archiver|电子发烧友 ( 湘ICP备2023018690号 )

GMT+8, 2025-12-4 01:58 , Processed in 1.144916 second(s), Total 69, Slave 50 queries .

Powered by 电子发烧友网

© 2015 bbs.elecfans.com

微信扫描
快速回复 返回顶部 返回列表