完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
在windows安装了msys2,编译riscv工具链源码报错,想求助各路大神帮我想想解决方法,谢谢!
/d/Home/riscv-gnu-toolchain/riscv-binutils/gas/doc/c-riscv.texi:31: table requires an argument: the formatter for @item /d/Home/riscv-gnu-toolchain/riscv-binutils/gas/doc/c-tic6x.texi:29: table requires an argument: the formatter for @item /d/Home/riscv-gnu-toolchain/riscv-binutils/gas/doc/c-tilegx.texi:29: table requires an argument: the formatter for @item /d/Home/riscv-gnu-toolchain/riscv-binutils/gas/doc/c-visium.texi:32: table requires an argument: the formatter for @item /d/Home/riscv-gnu-toolchain/riscv-binutils/gas/doc/c-xtensa.texi:34: table requires an argument: the formatter for @item /d/Home/riscv-gnu-toolchain/riscv-binutils/gas/doc/c-z80.texi:31: table requires an argument: the formatter for @item make[5]: *** [Makefile:507: as.info] Error 1 make[5]: Leaving directory '/d/Home/riscv-gnu-toolchain/build-binutils-newlib/gas/doc' make[4]: *** [Makefile:1274: all-recursive] Error 1 make[4]: Leaving directory '/d/Home/riscv-gnu-toolchain/build-binutils-newlib/gas' make[3]: *** [Makefile:816: all] Error 2 make[3]: Leaving directory '/d/Home/riscv-gnu-toolchain/build-binutils-newlib/gas' make[2]: *** [Makefile:4952: all-gas] Error 2 make[2]: Leaving directory '/d/Home/riscv-gnu-toolchain/build-binutils-newlib' make[1]: *** [Makefile:866: all] Error 2 make[1]: Leaving directory '/d/Home/riscv-gnu-toolchain/build-binutils-newlib' make: *** [Makefile:480: stamps/build-binutils-newlib] Error 2 |
|
相关推荐
|
|
只有小组成员才能发言,加入小组>>
在软件SDK中选择不同的下载模式时,是哪个部件更改了QSPI0中寄存器的值?
404 浏览 2 评论
cmt_instret_ena的使能为什么要排除branch等指令造成流水线冲刷的情况?
547 浏览 1 评论
e203 rom启动仅仅是引导到itcm执行指令吗?flash启动就是加载指令到itcm中吗?
574 浏览 1 评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-12-23 10:50 , Processed in 0.737553 second(s), Total 76, Slave 59 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号