关于MICO智能硬件的问题1

wangxd5429 当前离线 经验 58 窥视卡 雷达卡

wangxd5429 ( 楼主 ) 2017-2-15 09:04:06  只看该作者 22288 | 4 倒序浏览

各位高手，小弟正在使用MICODER集成开发环境向庆科的micokit 3165开发板烧写程序，烧写过程中出现“download failed”。请教其中的原因，谢谢！

沙发

micolover 发表于 2017-2-17 10:25:03

下载失败请把build里的log文件放出来
9 v) I2 P' C# p( O( m, t
. m, }' A3 @6 B+ I  Z新手请先查阅使用手册，和教学视频http://edu.mico.io/

板凳

wangxd5429 发表于 2017-2-24 09:55:53

谢谢micolover

4#

wangxd5429 发表于 2017-2-24 09:56:25

谢谢micolover

5#

wangxd5429 发表于 2017-3-9 10:47:21

LOG文件内容：
Open On-Chip Debugger 0.9.0 (2016-10-20-16:28)
Licensed under GNU GPL v2
, Z! v) z: c* h3 h: NFor bug reports, read
7 o0 R5 L- N/ t- ^0 H        http://openocd.org/doc/doxygen/bugs.html
% y' B# J0 ?5 s4 A' K0 Y# A. rInfo : JLink SWD mode enabled
! G1 q  U! Q& O) [8 p3 [swd
adapter speed: 10000 kHz
! @  m! o2 D) Z; h! l1 O1 }adapter_nsrst_delay: 100
adapter_nsrst_delay: 100
( C& ?* q8 q! ^# d9 O2 Nnone separate
+ p$ [$ y/ E% L& B8 C! [' Xcortex_m reset_config sysresetreq
jtag_init
sflash_erase
Error: libu***_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
! _# _1 k, s9 z3 N" r. pError: Cannot find jlink Interface! Please check connection and permissions.
$ ^% s0 ?2 {3 H0 I3 c
: r/ _! J! r1 mOpen On-Chip Debugger 0.9.0 (2016-10-20-16:28)
& K* a" V( D1 F6 c; U0 [Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
Info : JLink SWD mode enabled
, y$ F6 ?& F: a! h* l0 u$ mswd
9 P" V1 e( F% j8 Kadapter speed: 10000 kHz
6 Y  {# o8 ^" m2 A- u, B% O8 R% L  n5 E6 Dadapter_nsrst_delay: 100
adapter_nsrst_delay: 100
none separate
cortex_m reset_config sysresetreq
  s' F5 |5 M* M0 @* u0 x5 K* o( X+ ~jtag_init
sflash_erase
& h( w: f) M4 nError: libu***_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
7 R* R8 {! O' a% [- kError: Cannot find jlink Interface! Please check connection and permissions.
" E5 W7 z& H: m- Y
3 q; ~" J2 W$ G; l' ~# SOpen On-Chip Debugger 0.9.0 (2016-10-20-16:28)
, `& q# e* t8 {  TLicensed under GNU GPL v2
For bug reports, read
9 Q$ c$ G& J9 s) `( T- r* H        http://openocd.org/doc/doxygen/bugs.html
Info : JLink SWD mode enabled
' E  a" z- M! [- ~* }0 R; Pswd
0 t8 H  B7 H: k; }- P/ Dadapter speed: 10000 kHz
; g% ]5 {) q7 a: `0 {3 oadapter_nsrst_delay: 100
adapter_nsrst_delay: 100
none separate
cortex_m reset_config sysresetreq
jtag_init
7 |, \$ w7 f# Asflash_erase
Error: libu***_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Error: Cannot find jlink Interface! Please check connection and permissions.