完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
如果不使用LIS3DH的3个ADC输入引脚,我该怎么办?
#lis3dh#motion-sensor #accelerometer #accelerometer 以上来自于谷歌翻译 以下为原文 What should I do with the 3 ADC input pins of the LIS3DH if not used? #lis3dh #motion-sensor #accelerometer #accelerometer |
|
相关推荐
1个回答
|
|
你好Naue,
如果不使用,这3个ADC输入引脚可以连接到Vdd,或GND,或悬空。从功耗的角度来看,建议将它们连接到Vdd或GND。 有关详细信息,请查看随附的详细信息表并访问http://www.st.com/mems 谢谢, 蒂亚戈雷斯 naue 2013年9月7日星期六下午5:34 如果不使用LIS3DH的3个ADC输入引脚,我该怎么办? 以上来自于谷歌翻译 以下为原文 Hello Naue, These 3 ADC input pins if not used can be tied to Vdd, or GND, or left floating. From a the power consumption point of view, it is recommended to tie them to either Vdd or GND. For more details, please check the attached detail sheet and visit http://www.st.com/mems Thank you, Thiago Reis naue Saturday, September 07, 2013 5:34 PM What should I do with the 3 ADC input pins of the LIS3DH if not used? |
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
1474 浏览 1 评论
2142 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1511 浏览 1 评论
2836 浏览 6 评论
5271 浏览 21 评论
365浏览 4评论
556浏览 4评论
在Linux上安装Atollic TRUEStudio的步骤有哪些呢?
282浏览 3评论
使用DMA激活某些外设会以导致外设无法工作的方式生成代码是怎么回事
634浏览 3评论
533浏览 3评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-4-27 10:00 , Processed in 0.930624 second(s), Total 75, Slave 59 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号