完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
扫一扫,分享给好友
Hi Eason,
In the DM816x TRM, chapter 25 ROM Code, I can see that only EMAC0 (GMII0, CPGMAC0) is supported for boot by the ROM code. 25.5.2.1 MBOOT Configuration Pins The following shortcuts are used in the table: Ethernet Ethernet GMII0 interface (EMAC port 0) 25.8.4 Ethernet Boot Procedure Ethernet boot uses the CPGMAC0 subsystem of the device, connected to external Ethernet PHY using the GMII0 and MDIO pins. Table 25-24. Pins Used for Ethernet Boot - GMII0 pins |
|
|
|
如果你说的是从EMAC1启动,那恐怕是不行的,这需要ROM code支持才可以。但是从手册描述来看,是不支持的。
如果说的是在uboot下面通过EMAC1来下载代码,那是完全可以的。 BR, Eason |
|
|
|
sunsiyi92 发表于 2018-5-25 09:45 我指的不是从EMAC1启动,只是从EMAC1下载UBOOT而已,现在已经知道答案了,谢谢Eason Wang Come on, Let's go! |
|
|
|
只有小组成员才能发言,加入小组>>
TMS320F28377D:新做了以377d为芯片的板子,上电后芯片复位引脚出现方波请问如何解决?
1898 浏览 0 评论
TPS55340通电后输入端保险丝烧断,芯片输入和GND之间短路
3649 浏览 4 评论
5032 浏览 0 评论
请问如何用DM368对RGB格式的图片数据进行编码生成JPEG格式图片?
1736 浏览 1 评论
9384 浏览 8 评论
CC3100BOOST使用CC3200lunchXL进行烧录
670浏览 2评论
717浏览 1评论
TMS320F28034: 利用C2prog通过SCI给TMS320F28034烧录程序,出现错误提示:Bootloading... failed (invalid echo)!
677浏览 1评论
求DLPC350 Programmer’s Guide User's Guide 中文版说明书
1199浏览 1评论
1779浏览 1评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-4-26 15:55 , Processed in 0.533292 second(s), Total 76, Slave 60 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号