本人小白，
求助问题如下：
1、使用RT-Thread Studio, 新建工程，mcu型号，
STM32F407.
2、编译无报错，但DAP-Link下载时提示：
- UnicodeDecodeError: 'ascii' codec can't decode byte 0xc4 in position 0: ordinal not in range(128)
不知道怎么解决，求助各位师哥师姐指点一下。感谢
- 开始下载程序：2025-01-26 11:13:45
- D:RT-ThreadStudio>cd /d D:RT-ThreadStudiorepoExtractDebugger_Support_PackagesRealThreadPyOCD�.1.3
- D:RT-ThreadStudiorepoExtractDebugger_Support_PackagesRealThreadPyOCD�.1.3>pyocd.exe flash --target=STM32F407VE --erase=auto --frequency=1000000 D:My_RTTMy_demo1Debugrtthread.bin
- 0002262:CRITICAL:__main__:'ascii' codec can't decode byte 0xc4 in position 0: ordinal not in range(128)
- Traceback (most recent call last):
- File "pyocd__main__.py", line 362, in run
- File "pyocd__main__.py", line 520, in do_flash
- File "pyocdcoresession.py", line 302, in __enter__
- File "pyocdcoresession.py", line 416, in open
- File "pyocdprobecmsis_dap_probe.py", line 147, in open
- File "pyocdutilityconcurrency.py", line 28, in _locking
- File "pyocdprobepydapaccessdap_access_cmsis_dap.py", line 595, in open
- File "pyocdprobepydapaccesscmsis_dap_core.py", line 153, in dap_info
- UnicodeDecodeError: 'ascii' codec can't decode byte 0xc4 in position 0: ordinal not in range(128)
- 执行完毕, 耗时：4085ms.
