如何将RF扩展板上接收的数据中继到多功能板上?我的目标是让CyPress感测和控制仪表板将信息发送到RF扩展板(作为执行器),然后将此信息发送给多功能板。如果信息符合一定的标准,多功能板上的LED点亮。
以上来自于百度翻译
以下为原文
How do you relay data received on the RF Expansion Board to the Mul
tiFunction Board? My goal is to have the Cypress Sense and Control Dashboard transmit information to the RF Expansion Board (which is acting as an actuator), and then send this information to the MultiFunction board. If the information meets a certain criteria, an LED on the multifunction board will light up.