大家好,我正在使用RN2483-劳拉技术套件(一些MOTES +无线电+核心),并且并行地我设计我自己的服务器实时显示由MET发送的信息并由网关(无线电+核心)接收。我检查网关用户的指南,我没有发现任何信息。关于服务器中应该通过以太网端口与网关
通信的方法(POST或SOCKES)。我发现以下参数:网关IP地址服务器网关NETWORKS子网MaskServer IPServer上行端口服务器下行端口。
以上来自于百度翻译
以下为原文
Hello everyone,
I'm working with the
RN2483 LoRa Technology Kit(some Motes+Radio+Core) ,and in parallel i'm designing my own server to display in real
time the information sent by the motes and received by the Gateway (Radio+Core) .
I check the Gateway User’s Guide and i didn't found any information about the method(
POST or
Sockets) that should be used in the server to communicate with the Gateway through the Ethernet port.I found just the parameters below:
Gateway IP Address
Gateway Network
Default Subnet Mask
Server IP
Server Up Port
Server Down Port.
Thanks in advance Makers