嗨!
我想使用VEE 8.0将数据读/写到Microsfot Access 2003中。我在VEE示例ActiveXAutomation文件夹中找到了“AccessDataClient.Vee”示例,但此示例适用于使用DAO350.dll库的Access97。
因此,当我尝试使用DAO360.dll并运行此示例时,错误将发生在“addRecord()”部分。
任何人都知道如何做到这一点或可以分享一些程序示例给我?
真的,谢谢你这个电子邮件,无论你有没有例子...... ..DAO350.dll downlaod地址:http://www.dll-download.net/dao350.htmlDAO360.dll下载地址http://www.dlldump
.com / download -dll-fil ... nload.htmlryan ---您目前订阅了vrf:ming_meng@agilent.com要订阅,请发送电子邮件至:“vrf-request@lists.it.agilent.com
“在邮件正文中使用单词subscribe。
要取消订阅,请发送一封空白电子邮件至“leave-vrf@it.lists.it.agilent.com”。
要将邮件发送到此邮件列表,请发送电子邮件至“vrf@agilent.com”。
如果您需要有关邮件列表的帮助,请发送邮件至“owner-vrf@it.lists.it.agilent.com”。
在“http://www.vrfarchive.com/vrf_archive”上搜索“unofficial vrf archive”。
在“http://vee.engineering.agilent.com”上搜索Agilent vrf存档。
以上来自于谷歌翻译
以下为原文
Hi!
I would like to use VEE 8.0 to Read/Write data into Microsfot Access 2003. I found "AccessDataClient.Vee" example in VEE examples ActiveXAutomation folder, but this example is for Access97 which use DAO350.dll library. So when I try to use DAO360.dll and run this example, error will occur at "addRecord()" part.
Could any one know how to do this or can share some program example to me?
Really thank you for looing this email no matter you have the example or not…..
DAO350.dll downlaod address:
http://www.dll-download.net/dao350.html
DAO360.dll download address
http://www.dlldump.com/download-dll-fil ... nload.html
ryan
---
You are currently subscribed to vrf as:
ming_meng@agilent.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".
嗨!
我想使用VEE 8.0将数据读/写到Microsfot Access 2003中。我在VEE示例ActiveXAutomation文件夹中找到了“AccessDataClient.Vee”示例,但此示例适用于使用DAO350.dll库的Access97。
因此,当我尝试使用DAO360.dll并运行此示例时,错误将发生在“addRecord()”部分。
任何人都知道如何做到这一点或可以分享一些程序示例给我?
真的,谢谢你这个电子邮件,无论你有没有例子...... ..DAO350.dll downlaod地址:http://www.dll-download.net/dao350.htmlDAO360.dll下载地址http://www.dlldump
.com / download -dll-fil ... nload.htmlryan ---您目前订阅了vrf:ming_meng@agilent.com要订阅,请发送电子邮件至:“vrf-request@lists.it.agilent.com
“在邮件正文中使用单词subscribe。
要取消订阅,请发送一封空白电子邮件至“leave-vrf@it.lists.it.agilent.com”。
要将邮件发送到此邮件列表,请发送电子邮件至“vrf@agilent.com”。
如果您需要有关邮件列表的帮助,请发送邮件至“owner-vrf@it.lists.it.agilent.com”。
在“http://www.vrfarchive.com/vrf_archive”上搜索“unofficial vrf archive”。
在“http://vee.engineering.agilent.com”上搜索Agilent vrf存档。
以上来自于谷歌翻译
以下为原文
Hi!
I would like to use VEE 8.0 to Read/Write data into Microsfot Access 2003. I found "AccessDataClient.Vee" example in VEE examples ActiveXAutomation folder, but this example is for Access97 which use DAO350.dll library. So when I try to use DAO360.dll and run this example, error will occur at "addRecord()" part.
Could any one know how to do this or can share some program example to me?
Really thank you for looing this email no matter you have the example or not…..
DAO350.dll downlaod address:
http://www.dll-download.net/dao350.html
DAO360.dll download address
http://www.dlldump.com/download-dll-fil ... nload.html
ryan
---
You are currently subscribed to vrf as:
ming_meng@agilent.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".
举报