HiWATH没有PIC12F675 i的时钟输出

从文件：PICHCHIPIMP.html：FoCC＝振荡器选择BITSUTCTCRKRC振荡器：GP4/OSC2/CKOUT引脚上的CKKOUT函数，在GP5/OSC1/CKIN（Ryase:OxEclicOSKLKOUT）外置振荡器上：I/O函数在GP4/OSC2/CKOUT引脚上，RC在GP5/OSC1/CKIN（别名：γEXPCOSCONNOLKOUT）内部振荡器：GP4/OSC2/CKOUT引脚上的CKKOUT功能，GP5/OSC1/CKIN（别名：In CycSoCl CLKOUT）IPCO的I/O功能：GP4/OSC2/CKOUT引脚上的I/O功能，GP5/OSC1/CKIN（别名：In CycSoCo NOLCKOUT）ECEC上的I/O功能：GP4/OSC2/CKOUT引脚上的I/O功能，GP5/OSC1/CKIN上的CLKINHYSs振荡器：GP4/OSC2/CKKOUT和GP5/OSC1/CLKIN（Ayasas:HSYOSC）XTXT振荡器上的高速晶体/谐振器：GP4/OSC2/CKKOUT和GP5/OSC1/CLKIN（别名：XXTYOSC）LPLP振荡器上的晶体/谐振器：GP4/OSC2/CKOUT和GP5/OSC1/CKIN上的低功率晶体



      以下为原文

    from the file: pic_chipinfo.html:

FOSC =	Oscillator Selection bits
EXTRCCLK	RC oscillator: CLKOUT function on GP4/OSC2/CLKOUT pin, RC on GP5/OSC1/CLKIN	(aliases: _EXTRC_OSC_CLKOUT)
EXTRCIO	RC oscillator: I/O function on GP4/OSC2/CLKOUT pin, RC on GP5/OSC1/CLKIN	(aliases: _EXTRC_OSC_NOCLKOUT)
INTRCCLK	INTOSC oscillator: CLKOUT function on GP4/OSC2/CLKOUT pin, I/O function on GP5/OSC1/CLKIN	(aliases: _INTRC_OSC_CLKOUT)
INTRCIO	INTOSC oscillator: I/O function on GP4/OSC2/CLKOUT pin, I/O function on GP5/OSC1/CLKIN	(aliases: _INTRC_OSC_NOCLKOUT)
EC	EC: I/O function on GP4/OSC2/CLKOUT pin, CLKIN on GP5/OSC1/CLKIN	(aliases: _EC_OSC)
HS	HS oscillator: High speed crystal/resonator on GP4/OSC2/CLKOUT and GP5/OSC1/CLKIN	(aliases: _HS_OSC)
XT	XT oscillator: Crystal/resonator on GP4/OSC2/CLKOUT and GP5/OSC1/CLKIN	(aliases: _XT_OSC)
LP	LP oscillator: Low power crystal on GP4/OSC2/CLKOUT and GP5/OSC1/CLKIN

李察，你使用哪种编译器？哪个版本？当做



      以下为原文

    Richard,
which compiler do you use ?
Which version ?
Regards
 

谢谢Guysas我使用GPUTILS，它与MPASMI找到了我在P12F67中所要寻找的手腕，在询问之前应该更努力地寻找，不能在网上找到答案，它坐在LAPTPT上的一个目录上。



      以下为原文

    Thanks Guys
as I'm using gputils, its the same as MPASM
I found what I was looking for in p12f675.inc
Slapped wrists , should have looked harder before asking, couldn't find the answer on line, and it was sitting in one of the directories on the laptop.
sorry for the bandwidth
Richard
 

MPLABX确实有一个优点，它是一个编辑配置位的窗口，它为您选择的PIC设备的所有选项提供下拉选项。



      以下为原文

    One of the nice things that MPLABX does have, is a window for editing config bits, that gives you dropdown selections for all the options for the selected PIC device.