感谢您的答复。
我尝试更改模型设置的设置，我仍然得到相同的错误。
我玩了很多，仍然没有运气。
这是我用于模拟的错误消息和设计设置：http：//imgur.com/k1QNFxI看起来模拟没有识别布局窗口中的两个放置的引脚？
（错误说示原理图和布局中的2个引脚和0个引脚）任何想法？
以上来自于谷歌翻译
以下为原文
Thanks for your response.
I tried changing the settings for the model settings and I still get the same error. I played with it quite a bit and still no luck. Here's the error messages and design settings I used for simulation:
http://imgur.com/k1QNFxI
Looks like the simulation doesn;t recognize the two placed pins inside the layout window? (error says 2 pins and 0 pins in schematic & layout)
Any ideas?
感谢您的答复。
我尝试更改模型设置的设置，我仍然得到相同的错误。
我玩了很多，仍然没有运气。
这是我用于模拟的错误消息和设计设置：http：//imgur.com/k1QNFxI看起来模拟没有识别布局窗口中的两个放置的引脚？
（错误说示原理图和布局中的2个引脚和0个引脚）任何想法？
以上来自于谷歌翻译
以下为原文
Thanks for your response.
I tried changing the settings for the model settings and I still get the same error. I played with it quite a bit and still no luck. Here's the error messages and design settings I used for simulation:
http://imgur.com/k1QNFxI
Looks like the simulation doesn;t recognize the two placed pins inside the layout window? (error says 2 pins and 0 pins in schematic & layout)
Any ideas?
举报
