ST意法半导体
直播中

李咏华

8年用户 190经验值
私信 关注
[问答]

LED1642GW的Latch信号在一个字内移位是否重要?

你好,
根据LED1642驱动器的数据表,LE信号值由
在数据表中,数字始终显示LE信号,这些信号与新数据信号(SDI)的第一个上升时钟沿对齐(如附图所示)。
这是我们在实施驱动程序时需要满足的要求吗?当LE信号在数据信号块(16位)中间的指定数量的时钟上升沿为高时有效吗?
最好的祝福

以上来自于谷歌翻译


以下为原文




Hello,
according to the datasheet of the LED1642 driver, the LE signal value is defined by the
In the datasheet, the figures always show LE signals which are aligned to the first rising clock edge of a new data signal (SDI) (like it is shown in the attached figure).
Is this a requirement we need to meet when implementing a driver? Is it valid, when the LE signal is high for a specified number of clock rising edges in the middle of a data signal block (16 bit)?
best regards

回帖(3)

李咏华

2019-1-10 16:30:08


以上来自于谷歌翻译


以下为原文




push
举报

李咏华

2019-1-10 16:44:45
我是否必须将此主题移至其他地方?

以上来自于谷歌翻译


以下为原文




Do I have to move this topic to somewhere else?
举报

符伯峪

2019-1-10 16:51:42
这些主要是工程师到工程师论坛,而不是访问ST的FAE的方式,因此获得答案在某种程度上依赖于其他人共享相似的兴趣或问题。
有一个在线支持申请表,这可能会从他们的内部常见问题解答和支持服务单系统中得出一些答案。
如需工程支持,请联系当地销售办事处。

以上来自于谷歌翻译


以下为原文




These are primarily engineer-to-engineer forums, not a way to access ST's FAEs, so getting answers is somewhat reliant on other sharing similar interests or problems.
There is an online support request form, and this might yield some answers from their internal FAQ and support ticket system.
For engineering support contact your local sales office.
举报

更多回帖

发帖
×
20
完善资料,
赚取积分