我刚刚在89600软件中启用了Spectrum Analysis选项,并且能够使用SFP配置所需的测量。
我配置了10Mhz到1GHz的“功率谱”测量。
现在的问题是如何使用SCPI配置相同的测量。
在帮助文件中,在SCPI命令树下,我找到“MEAS:CONF”,但是所列出的选项似乎都没有找到“Power Spectrum”我是否应该查看不同的SCPI命令列表或更新版本?
提前致谢。
以上来自于谷歌翻译
以下为原文
I have just enabled the Spectrum Analysis op
tion in our 89600 software and have been able to use the SFP to configure a desired measurement. I have configured a 10Mhz to 1GHz "Power Spectrum" measurement.
Question now is how to use SCPI to configure the same measurement. In the help files, under the SCPI command tree I find "MEAS:CONF " but none of the listed options seem to releate to "Power Spectrum"
Should I be looking at a different SCPI command list or an updated version of this one?
Thanks in advance.