关于DM368的EMDA3的传输地址问题，需要读一个0x11的16位地址，只能设置0,0x10,0x20…这一类地址，请问这是什么原因呢？

  你使用的是哪种地址增加模式？下面的信息可以在dm36x的edma user guide里找到：
The 32-bit source address parameter specifies the starting byte address of the source. For SAM in
increment mode, there are no alignment restrictions imposed by EDMA3. For SAM in constant addressing
mode, you must program the source address to be aligned to a 256-bit aligned address (5 LSBs of
address must be 0).
The 32-bit destination address parameter specifies the starting byte address of the destination. For DAM
in increment mode, there are no alignment restrictions imposed by EDMA3. For DAM in constant
addressing mode, you must program the destination address to be aligned to a 256-bit aligned address (5
LSBs of address must be 0).

  你使用的是哪种地址增加模式？下面的信息可以在dm36x的edma user guide里找到：
The 32-bit source address parameter specifies the starting byte address of the source. For SAM in
increment mode, there are no alignment restrictions imposed by EDMA3. For SAM in constant addressing
mode, you must program the source address to be aligned to a 256-bit aligned address (5 LSBs of
address must be 0).
The 32-bit destination address parameter specifies the starting byte address of the destination. For DAM
in increment mode, there are no alignment restrictions imposed by EDMA3. For DAM in constant
addressing mode, you must program the destination address to be aligned to a 256-bit aligned address (5
LSBs of address must be 0).

举报