orcad导网表的报错，求教如何解决

`提示的错误信息如下：#5 ERROR(ORCAP-36001): Conflicting values of Source Part names found on C203(C_1) and C195(C_0) for part "GRM31CR60J226ME19L".
#6 ERROR(ORCAP-36001): Conflicting values of Source Part names found on C205(C_1) and C195(C_0) for part "GRM31CR60J226ME19L".
#7 ERROR(ORCAP-36001): Conflicting values of Source Part names found on C207(C_1) and C195(C_0) for part "GRM31CR60J226ME19L".



9 ERROR(ORCAP-36003): Conflicting values of following Component Definition properties found on C21 and C12 for part "GRM155R60J225ME15D".
              PCB Footprint
#10 ERROR(ORCAP-36003): Conflicting values of following Component Definition properties found on C211 and C137 for part "04025C102KAT2A".
              VALUE
#11 ERROR(ORCAP-36001): Conflicting values of Source Part names found on C216(C_0) and C204(C_6) for part "1206GC102MAT1A".
#12 ERROR(ORCAP-36001): Conflicting values of Source Part names found on C218(C_1) and C109(C_0) for part "RMEMK105BJ104KV_FR".
#13 ERROR(ORCAP-36003): Conflicting values of following Component Definition properties found on C2213 and C2202 for part "CM105X5R475M06AT".
              PCB Footprint
              VALUE



网上搜了一下，说把DEVICE删了就好了，但删了之后会显示miss device（没有完全删除，始终会有CP字符）。求正确的处理方式。
`