16x16点阵显示

提示: *该帖被管理员或版主屏蔽*

提示: 该帖被管理员或版主屏蔽

王涛 · 2013-3-22 13:05:42

看看哈

yangbo_box · 2013-4-6 11:29:39

这个用595可以吗？

XWMC · 2013-5-25 16:58:26

啊啊啊啊啊啊啊阿啊啊啊啊啊啊啊啊阿啊啊啊啊啊啊啊啊阿啊啊啊啊啊啊

Dump.Time · 2013-6-25 21:03:38

学习学习

郑永恒 · 2013-6-26 11:35:24

天王盖地虎，宝塔镇河妖

罗木木爱蓝buff · 2013-7-13 00:39:01

不错收藏下来等会看看

绿依然 · 2013-7-13 06:36:14

学习学习。

张松严 · 2013-7-13 08:13:36

嗯，好

lhhsky · 2014-1-17 16:40:27

顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶

叮咚57kg · 2014-6-6 19:05:57

订了！！！！！！

阳光孩子 · 2014-6-28 18:06:30

好厉害啊，顶顶顶顶顶顶

漂漂猪 · 2016-4-14 21:52:42

看起来还不错的样子

刘涛 · 2016-4-16 18:01:49

求GB2312字库使用方法和c源码！！！最好能举例子

刘嘉玲 · 2016-6-16 10:24:51

#include #define int8 unsigned char #define int16 unsigned int #define int32 unsigned long int8 flag; int8 n; int8 code table[][32]={ {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* " " */ {0x04,0x28,0x08,0x24,0x32,0x22,0xC2,0x21,0xC2,0x26,0x34,0x38,0x04,0x04,0x08,0x18,0x30,0xF0,0xC0,0x17,0x60,0x10,0x18,0x10,0x0C, 0x14,0x06,0x18,0x04,0x10,0x00,0x00},/*"欢",0*/ {0x02,0x02,0x04,0x82,0xF8,0x73,0x04,0x20,0x02,0x00,0xE2,0x3F,0x42,0x20,0x82,0x40,0x02,0x40,0xFA, 0x3F,0x02,0x20,0x42,0x20,0x22,0x20,0xC2,0x3F,0x02,0x00,0x00,0x00},/*"迎",1*/ {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* " " */ }; void delay(void); int16 offset; void main(void) { int8 i; int8 *p; flag=0x10; n=0; TMOD=0x01; TH0=0xb1; TL0=0xe0; ET0=1; EA=1; TR0=1; p=&table[0][0]; while (1) { for (i=0;i<8;i++) //显示左半边屏幕 { P0=*(p+offset+2*i); P2=i|0x08; //P2.4=0,P2.3=1 选中U2, 输出扫描码给U6 delay(); P0=*(p+offset+2*i+1); P2=i|0x10; //P2.4=1,P2.3=0 选中U3, 输出扫描码给U7 delay(); } for (i=8;i<16;i++) //显示右半边屏幕 { P0=*(p+offset+2*i); P2=(i-8)|0x20; //P2.5=1 P2.4=0, P2.3=0 选中U4,输出扫描码U8 delay(); P0=*(p+offset+2*i+1); P2=(i-8)|0x40; //P2.6=1 P2.5=0, P2.4=0 选中U5,输出扫描码U9 delay(); } } } void delay(void) { int16 i; for (i=0;i<50;i++) ; } void timer0() interrupt 1 using 3 { TF0=0; TH0=0xb1; TL0=0xe0; if (n<10) { n++; } else { offset+=2; if (offset>1100) offset=0; n=0; } }