[讨论]

基于msp430f149的24c02程序

2013-7-8 21:13:38 1974

0 #ifndef __24C02_H__ #define __24C02_H__ #include "msp430x14x.h" #define OP_READ 0xa1 // 器件地址以及读取操作 #define OP_WRITE 0xa0 // 器件地址以及写入操作 #define uchar unsigned char #define uint unsigned int #define SDA_OUT P1DIR\|=BIT3 #define SDA_IN P1DIR&=~BIT3 #define SCL_OUT P1DIR\|=BIT2 #define SCL_IN P1DIR&=~BIT2 #define SDA_H P1OUT\|=BIT3 #define SDA_L P1OUT&=~BIT3 #define SCL_H P1OUT\|=BIT2 #define SCL_L P1OUT&=~BIT2 //8M晶振时大约20us延时程序 void delayus(uint z) { uint i,j; for(i = 0;i<20;i++) for(j=0;j {;;}; } // 开始位 void start() { SDA_OUT; SCL_OUT; SDA_H; SCL_H; delayus(1); //20 SDA_L; delayus(2);//40 SCL_L; } // 停止位 void stop() { SDA_OUT; SCL_OUT; SDA_L; delayus(2);//20 SCL_H; delayus(2); SDA_H; } // 从AT24Cxx移入数据到MCU uchar shin() { uchar i,read_data; SDA_OUT; SCL_OUT; for(i = 0; i < 8; i++) { SDA_H; delayus(1); SCL_H; SDA_IN; read_data <<= 1; if(P1IN&BIT3) read_data\|=0x01; SDA_OUT; SCL_L; } return(read_data); } // 从MCU移出数据到AT24Cxx uchar shout(uint write_data) { uchar i; uchar ack_bit; SDA_OUT; SCL_OUT; for(i = 0; i < 8; i++) // 循环移入8个位 { if(write_data&0x80) SDA_H; else SDA_L; delayus(2);//2 SCL_H; delayus(2);//2 SCL_L; delayus(2);//2 write_data <<= 1; } SDA_H; // 读取应答 delayus(2); SCL_H; //注意拉高 delayus(2); SDA_IN; if(P1IN&BIT3) ack_bit=1; else ack_bit=0; SCL_L; return ack_bit; // 返回AT24Cxx应答位 } // 在指定地址addr处写入数据write_data void write_byte(uchar addr, uchar write_data) { SDA_OUT; SCL_OUT; SDA_H; SCL_H; start(); shout(OP_WRITE); shout(addr); shout(write_data); stop(); delayus(1000); // 写入周期 } // 在当前地址读取 uint read_current() { uint read_data; start(); shout(OP_READ); read_data = shin(); stop(); return read_data; } // 在指定地址读取 uchar read_random(uint random_addr) { SDA_IN; SCL_OUT; SDA_H; SCL_H; start(); shout(OP_WRITE); shout(random_addr); return(read_current()); } #endif 0
2013-7-8 21:13:38　　评论淘帖0 举报相关推荐 • MSP430f149程序框架 21 • MSP430F149程序 12 • MSP430F149 26 • msp430f149 0 • 基于MSP430F149的触摸手写程序 12 • MSP430F149流水灯 2 • msp430f149 datasheet 45 • MSP430F149的12864显示程序 25 • msp430f149数据手册 106 • MSP430F149(中文) 112