运行build kernel.sh脚本收到错误

我两年前下载了ti-linux-kernel-dev / tree并成功构建/刷新了它。
今天我尝试运行build_kernel.sh脚本，并在patch.sh:rt（）中收到错误（请参阅下面的错误输出粘贴）。
这里发生了什么事？
（我只想要一个简单的vanilla内核;我不想要CONFIG_PREEMPT_RT用于我正在做的任何事情;这是为了BEAGLEBONE BLACK）。
请指教。
谢谢。
迪尔：rt
应用：merge：CONFIG_PREEMPT_RT补丁集
错误：补丁失败：localversion-rt：1
错误：localversion-rt：补丁不适用
在0001合并时补丁失败：CONFIG_PREEMPT_RT补丁集
失败的补丁副本可在以下位置找到：
/src/ti-linux-kernel-dev/KERNEL/.git/rebase-apply/patch
解决此问题后，运行“git am --continue”。
如果您想跳过此补丁，请改为运行“git am --skip”。
要恢复原始分支并停止修补，请运行“git am --abort”。



以下为原文

        I had downloaded the ti-linux-kernel-dev/ tree two years ago and built/flashed it successfully.
Today I try to run the build_kernel.sh script and I get an error at patch.sh:rt()  (see error output pasted-in below).   What’s happening here?  (I just want a plain vanilla kernel; I don’t want CONFIG_PREEMPT_RT for anything I’m doing; this is for BEAGLEBONE BLACK).  Please advise.  Thank you.
dir: rt
Applying: merge: CONFIG_PREEMPT_RT Patch Set
error: patch failed: localversion-rt:1
error: localversion-rt: patch does not apply
Patch failed at 0001 merge: CONFIG_PREEMPT_RT Patch Set
The copy of the patch that failed is found in:
/src/ti-linux-kernel-dev/KERNEL/.git/rebase-apply/patch
When you have resolved this problem, run “git am --continue”.
If you prefer to skip this patch, run “git am --skip” instead.
To restore the original branch and stop patching, run “git am --abort”.