完善资料让更多小伙伴认识你，还能领取20积分哦， 立即完善>
3天内不再提示
电子发烧友论坛|
你好，
登录后屏幕无法正常缩放，我遇到了一个非常奇怪的问题。 几乎是因为他们无法识别显示器的分辨率并进行扩展。 环境 •Xen Desktop 7.14.1 •Server 2016 +完全修补 •Vmware ESXI •Nvidia Grid GPU设置为VM的直通设备。 VM正在充当Xen Desktop VDA（共享托管）。 •Viewsonic SC-T35瘦客户机 问题 •用户登录时，显示屏似乎无法正确缩放。 只有1个屏幕的左上角有桌面背景（没有鼠标/图标）屏幕设置为1920x1080（对于两个屏幕），运行相同的DPI（相同型号）。 •仅当他们登录到配置了GPU的VDA时才会发生这种情况。 昨天我做了很多故障排除。 奇怪的是，我发现如果Citrix Profile Management Service被禁用，问题就会消失（这没有任何意义）。 这意味着最终用户正在服务器上使用本地配置文件，而不是存储在UNC上的配置文件。 有什么想法吗？ 缩放问题的屏幕截图。 https://ibb.co/gzcwxv 以上来自于谷歌翻译 以下为原文 Hello, I am having a very odd issue with screens not scaling properly after login. It is almost as they don't recognize the resolution of the monitor and expand. Environment •Xen Desktop 7.14.1 •Server 2016 + Fully Patched •Vmware ESXI •Nvidia Grid GPU setup as passthrough device to VM. VM is functioning as Xen Desktop VDA (shared hosted). •Viewsonic SC-T35 Thin Clients Problem •When users log in, the display does not appear to scale properly. Only the top upper left hand corner of 1 screen has the desktop background (no mouse/icons) The screens are setup as 1920x1080 (for both screens), running the same DPI (same model). •This only happens when they log into a VDA that has a pass through GPU configured. I did a good deal of troubleshooting yesterday. Oddly enough, I found that if the Citrix Profile Management Service is disabled, the issue goes away (which makes no sense). This means that the end user is using a local profile on the server, instead of a profile stored on a UNC. Any thoughts? Screenshot of scaling issue. https://ibb.co/gzcwxv 
0
|
|
相关推荐
7个回答
|
|
|
请向Citrix寻求解决方案。
据我所知，有一个私人修复，它应该用7.15修复 以上来自于谷歌翻译 以下为原文 Please ask Citrix for a fix. There is a private fix available as far as I know and it should be fixed with 7.15 |
|
|
|
|
|
没有可用的私有修补程序。
我不确定sschaber在引用什么。 我在故障排除中注意到的一些项目。 VDA 7.12似乎更稳定/可靠。 基础设施可以保持在7.14.1 M60的最新nVidia驱动程序（370.12）似乎工作正常。 您可能希望从VMTools安装中删除SVGA驱动程序（这是Citrix支持推荐的），并验证VM本身未检查“启用3D支持”。 以上来自于谷歌翻译 以下为原文 There are no private hotfixes available. I'm not sure what sschaber is quoting. Some items I've noticed in troubleshooting. VDA 7.12 seems to be more stable/reliable. Infrastructure can remain at 7.14.1 The latest nVidia driver (370.12) for the M60 seems to be working fine. You may want to look into removing the SVGA Driver from the VMTools install (this was recommended by Citrix support) and validate that 'Enable 3D Support' is not checked on the VM itself. |
|
|
|
|
|
对于我们在vda 7.15（基础设施在7.14.1）我们有同样的问题季度窗口只从左上角开始我们使用M60特斯拉。
鼠标在黑色层后面工作，每个键盘的开始菜单也可以。 如果我们按GPo激活RDP Grapic设置以激活GPU渲染，则会出现问题。 我们有Igel瘦客户端。 Linux Citrix Receiver无法像在Windows Citrix接收器中那样调整窗口大小，因此我们无法刷新桌面。 在论坛中有人可以控制这些问题吗？ 是否有解决方法，因为我们还使用Citrix配置文件管理。 谢谢 以上来自于谷歌翻译 以下为原文 For us in vda 7.15 (infrastructure is in 7.14.1) we have the same problem with the quarter Window only starts at top left corner we use a M60 Tesla. Mouse works behind the black layer and start menu per keyboard works also. If we activate per GPo the RDP Grapic Settings for activate the GPU Rendering the problem occurs. We have Igel thin clients. The Linux Citrix Receiver can't resize the Window like in Windows Citrix receiver, so we can't refresh the desktop. Is here in the forum someone who can control these problem? Is there a workaround because we use also Citrix profile management. Thanks |
|
|
|
|
|
嗨，
这是否仅适用于Citrix Receiver for Linux？ 还请与胖客户端一起测试。 如果它可以与胖客户端重现，我建议您提交Nvidia的错误，如果没有，请联系Citrix。 问候 西蒙 以上来自于谷歌翻译 以下为原文 Hi, does this only occur with Citrix Receiver for Linux? Please also test with a Fat client. If it is reproducable with a fat client I would recommend to file a bug with Nvidia, if not, please contact Citrix. Regards Simon |
|
|
|
|
|
也是在胖客户端...我们通过Windows系统32中的dll为Citrix的vda 14.1修复了私有修补程序。
该DLL版本为Nummer 14.2 !!! 感谢您的回复 以上来自于谷歌翻译 以下为原文 Yes also in fatclient... We fix it with a private hotfix by an dll in Windows system 32 for vda 14.1 from Citrix . The dll has version Nummer 14.2!!! Thanks for reply |
|
|
|
|
|
嗨Tobemank，
感谢您的反馈意见。 所以我的初始帖子是正确的，但我被告知应该已经修复了7.15 问候 西蒙 以上来自于谷歌翻译 以下为原文 Hi Tobemank, thanks for your feedback. So I was right with my initial post but I was told this should have been fixed with 7.15 Regards Simon |
|
|
|
|
|
嗨西蒙抱歉与VDA 7.15还有一个Bug，需要一个私人修补程序...
感谢bemank 以上来自于谷歌翻译 以下为原文 Hi Simon sorry with VDA 7.15 there is also a Bug and a private hotfix is needed... Thanks tobemank |
|
|
|
|
只有小组成员才能发言，加入小组>>
使用Vsphere 6.5在Compute模式下使用2个M60卡遇到VM问题
3123 浏览 5 评论
是否有可能获得XenServer 7.1的GRID K2驱动程序？
3530 浏览 4 评论
/6 
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
3666
评论
淘帖
13843
