可以尝试
http://processors.wiki.ti.com/index.php/Contiki-6LOWPAN 或
http://processors.wiki.ti.com/index.php/Cc26xx_sw_examples
This Getting Started section will show you how to create an Edge Router running Contiki in Linux on a BeagleBone Black (BBB) with CC2531 USB Dongle (2.4GHz) or a SmartRF06EB+CC13xxEM (sub-1GHz) as RF interface. CC13xx/CC26xx mesh devices (either SmartRF06EB-CC13xxEM/CC2650EM or CC2650 SensorTags acting as routers (RPL storing mode)) will connect to the Edge Router and use it to send their data.
可以尝试
http://processors.wiki.ti.com/index.php/Contiki-6LOWPAN 或
http://processors.wiki.ti.com/index.php/Cc26xx_sw_examples
This Getting Started section will show you how to create an Edge Router running Contiki in Linux on a BeagleBone Black (BBB) with CC2531 USB Dongle (2.4GHz) or a SmartRF06EB+CC13xxEM (sub-1GHz) as RF interface. CC13xx/CC26xx mesh devices (either SmartRF06EB-CC13xxEM/CC2650EM or CC2650 SensorTags acting as routers (RPL storing mode)) will connect to the Edge Router and use it to send their data.
举报
