如何在i3070中使用GpRelay？

无论何时您想要硬件开关，都可以将Agilent MINT引脚连接到夹具上。
您可以在测试计划中或使用测试块打开和关闭继电器：gpconnect“NodeA”到“NodeB”gpdisconnect“NodeA”来自“NodeB”



     以下为原文

  Whenever you want to have a hardware switch you can wire from the Agilent MINT pins in to your fixture.  You can turn the relays on and off in the testplan or withing test blocks: 

gpconnect "NodeA" to "NodeB"

gpdisconnect "NodeA" from "NodeB"

当你需要在一些IC中复位，切换一些信号，连接外部硬件和ICT等等......你的想象力和你的需求是极限。编辑：rmsais于2013年7月19日下午12:27



     以下为原文

  When you need make a reset in some IC, switching some signal, connect external hardware with the ICT, etc... Your imagination and your needs are the limit.

Edited by: rmsais on Jul 19, 2013 12:27 PM

GPRelay是“通用继电器”，或测试仪上的开关，用于建立或断开连接，打开或关闭电路等。



     以下为原文

  The GPRelays are "General Purpose Relays", or switches on the tester that are there to make or break connections, turn on or off circuits, etc.