@ PSoC73:感谢您的信息，但我们已经拥有所有这些ANS以及PSOC3工作设计，读取2×5×12矩阵膜键盘，2编码器，并通过USB端口与PC通信。我们正在寻找特殊的大容量键盘设计经验，因为我们只限于6传感器PANNELS，并接近项目的最后期限。
@ ARVI
谢谢你。我已经有了AN（没有过时的冲压）。它让我感到惊奇的是，在参考文献中的设计是没有新的AN沿这条线已经可用，甚至没有新的PSoC系列或改进的电容传感技术。你知道它是从实验室测试出来的，经验和用户反馈是什么？你会说这样的布局（稍微修改，以适应我们的键盘布局）将工作与PSoC3好吗？不管怎样，如果你能给我们一个最初的计划，那就太好了。
再次感谢所有回答的人。
以上来自于百度翻译
以下为原文
@psoc73: thank you for the info but we already had all those ANs as well as a psoc3 working design that reads 2 5 x 12 matrix membrane keyboards, 2 encoders and communicates with a PC through a USB port. We were looking specifically for large capacitive keyboards design experience because ours is limited to 6-sensor pannels and are close to the project deadline.
@ARVI
Thank you too. I already had the AN (without the Obsolete stamping). What it made me wonder about the design featured in the reference AN is that no new AN along that line has been made available, not even with the new psoc families or the improved capacitive sensing techniques. Do you know if it was tested out of the lab and what the experience and user feedback was? Would you say that such layout (slightly modified to suit our keyboard layout) would work alright with a psoc3? Anyways, it would be great if you can get us the original project.
Again thank you to all those that replied.
@ PSoC73:感谢您的信息，但我们已经拥有所有这些ANS以及PSOC3工作设计，读取2×5×12矩阵膜键盘，2编码器，并通过USB端口与PC通信。我们正在寻找特殊的大容量键盘设计经验，因为我们只限于6传感器PANNELS，并接近项目的最后期限。
@ ARVI
谢谢你。我已经有了AN（没有过时的冲压）。它让我感到惊奇的是，在参考文献中的设计是没有新的AN沿这条线已经可用，甚至没有新的PSoC系列或改进的电容传感技术。你知道它是从实验室测试出来的，经验和用户反馈是什么？你会说这样的布局（稍微修改，以适应我们的键盘布局）将工作与PSoC3好吗？不管怎样，如果你能给我们一个最初的计划，那就太好了。
再次感谢所有回答的人。
以上来自于百度翻译
以下为原文
@psoc73: thank you for the info but we already had all those ANs as well as a psoc3 working design that reads 2 5 x 12 matrix membrane keyboards, 2 encoders and communicates with a PC through a USB port. We were looking specifically for large capacitive keyboards design experience because ours is limited to 6-sensor pannels and are close to the project deadline.
@ARVI
Thank you too. I already had the AN (without the Obsolete stamping). What it made me wonder about the design featured in the reference AN is that no new AN along that line has been made available, not even with the new psoc families or the improved capacitive sensing techniques. Do you know if it was tested out of the lab and what the experience and user feedback was? Would you say that such layout (slightly modified to suit our keyboard layout) would work alright with a psoc3? Anyways, it would be great if you can get us the original project.
Again thank you to all those that replied.
举报
