Microchip
直播中

沈会笛

7年用户 309经验值
私信 关注
[问答]

MAX7221的电流下降是否更高?

是的,我知道它不是主题(但它连接到PIC)。也不是一个成本效益高的解决方案。但它已经在PCB上了。它的最大电流为40Ma。我需要60至90毫安。我正在寻找一个下降的替代品。

以上来自于百度翻译


      以下为原文

    Yes I know it is off topic (but it is connected to a PIC).
And Not a cost effective solution.
But it is already on the PCB.  It has a max current of 40ma. I need 60 to 90ma.
I am looking for a drop-in replacement..

回帖(4)

肖舒

2019-6-12 08:56:36
检查驾驶员的着陆页。他们有一个应用笔记,告诉你如何连接到外部FET驱动更多的电流。

以上来自于百度翻译


      以下为原文

    Check their landing page for the driver.  They have an app note that shows you how to connect to external FET to drive more current. 
举报

陈晨

2019-6-12 09:05:44
考虑到它的成本,在增加成本之前,我会先使用PIC。如果可能的话,目标是在没有板旋转的情况下使LED发光。

以上来自于百度翻译


      以下为原文

   


Considering what it costs, I would go with a PIC before I added more cost to it.
The goal is to brighten up the LEDs without a board spin, if posible
举报

王焕树

2019-6-12 09:11:48
一次性产品,还是商业产品?当我读它时,功耗是问题。你可以尝试散热芯片,并改变ISET电阻器,以推动更多的电流通过现有的芯片。

以上来自于百度翻译


      以下为原文

    One-off, or commercial product?
As I read it, power dissipation is the problem.
You could try heatsinking the chip, and changing the ISET resistor to push a bit more current through the existing chip.
 
 
举报

陈晨

2019-6-12 09:17:38
这是一个商业产品的预生产运行。现在要重新设计(到现在为止)。我很惊讶,没有人把这个老的基于Intersil的芯片弄掉了,而且它的价格是多么昂贵。

以上来自于百度翻译


      以下为原文

    It is a a Pre-production Run for a commercial product.
It is to late to to redesign (for Now).
I am surprised that no one has juiced this old Intersil based Chip, and how expensive it is
 
举报

更多回帖

发帖
×
20
完善资料,
赚取积分