如何使用SCPI命令读取从PSU获取的电流和电压？

我正在使用U3606A，通过GPIB编程（参考手册U3606-90023）。我使用U3606A作为PSU和DMM。
：SOUR命令允许我根据需要设置PSU，前显示屏有助于告知我（右侧）当前PSU输出的电压和电流。我的问题是从仪器读取电流和电压
从PSU中抽取。
似乎没有SCPI命令要求PSU（而不是DMM）实际输出什么电压和电流。
如何使用SCPI命令读取从PSU获取的电流和电压？
也就是说，前面显示屏上显示的值显示在右边......？（！）。谢谢！



     以下为原文

  I am using a U3606A, programming it over GPIB (ref. manual U3606-90023).

I am using the U3606A as a PSU as well as a DMM. The :SOUR commands allow me to set up the PSU as I need, and the front display helpfully informs me (on the right) of the voltage and current currently being output by the PSU.

My problem is reading from the instrument the current and voltage draw from the PSU. There appear to be no SCPI commands to ask the PSU (rather than the DMM) what voltage and current is actually being output. How can I read the current and voltage drawn from the PSU using SCPI commands? That is, the values happily displayed on the front display to the right...?(!).

Thanks!