如何在逻辑上连接或连接不同的逻辑块

LogiCore是否仍然受支持？
----------------------------是的，我这样做是为了谋生。



以下为原文

Is LogiCore even still supported?
----------------------------Yes, I do this for a living.

bassman59写道：
LogiCore是否仍然受支持？
当我独立启动12.3版本的“Xilinx CORE Generator”时，它有一个相当突出的“LogiCORE”标识。我怀疑OP需要指向一个或多个精细教程。
------------------------------------------“如果它不起作用
模拟，它不会在板上工作。“



以下为原文

bassman59 wrote:
Is LogiCore even still supported?

When I start the 12.3 version of "Xilinx CORE Generator" stand-alone, it has a fairly prominent "LogiCORE" logo.

I suspect that the OP needs to be pointed at one or more Fine Tutorials.


------------------------------------------
"If it don't work in simulation, it won't work on the board."

先生/妈妈，我正在使用ise11.1。
它支持logicore。如果我写了一个vhdl代码ex.4位加法器，然后想把它转换成logicore，那我该怎么做.plz提取我任何教程，或者你提前给我推荐一些有价值的评论。



以下为原文

sir/mam, i am using ise11.1. it supports logicore .if i write a vhdl code ex.4 bit adder,then want to convert it into logicore,then how do i do it.plz sugest me any tutorial,or ur valuable comment with example.thanks in advance.

你有我们的英语使用者称之为“错误的一端”。
LogiCore用于Xilinx提供的IP。您可能想要做的相关术语是“组件实例化”。
------------------------------------------“如果它不起作用
模拟，它不会在板上工作。“



以下为原文

You have what we English speakers call "the wrong end of the stick". LogiCore is for Xilinx-supplied IP.

The relevant term for what you probably want to do is "component instantiation".

------------------------------------------
"If it don't work in simulation, it won't work on the board."