如果我使用STM32作为我的逆变器，我可以得到MC_FOC_Methods_lib和MC_State_Observer_lib
直到升降机打开休息时，变频器才知道CAR中有多少人。每次升降从一层到另一层只能通过Speed PI，我无法获得最佳效果。现在我使用TI TMS320F2812
以上来自于谷歌翻译
以下为原文
if i use STM32 for my Inverter,can i get the sourse of MC_FOC_Methods_lib and MC_State_Observer_lib
and until the lift is open Break ,the Inverter does not know how much peoples in the CAR.I can not get the best every times that the lift from one floor to anther floor only through Speed PI.Now I Use TI TMS320F2812
如果我使用STM32作为我的逆变器，我可以得到MC_FOC_Methods_lib和MC_State_Observer_lib
直到升降机打开休息时，变频器才知道CAR中有多少人。每次升降从一层到另一层只能通过Speed PI，我无法获得最佳效果。现在我使用TI TMS320F2812
以上来自于谷歌翻译
以下为原文
if i use STM32 for my Inverter,can i get the sourse of MC_FOC_Methods_lib and MC_State_Observer_lib
and until the lift is open Break ,the Inverter does not know how much peoples in the CAR.I can not get the best every times that the lift from one floor to anther floor only through Speed PI.Now I Use TI TMS320F2812
举报
