你好,
如果你为你的I/O引脚选择2.5V LVCMOS I/O标准,你需要将PoLTSTD(0:1)引脚连接到3.3伏电源。
这里VTTL代表3.3 V LVTTL电源本身。
请查看KBA86937关于Flex Flex设备中可选I/O标准的详细信息。
此外,您可以在我们的FulfFLX双端口SRAM设计指南(第2.1节)中找到这些信息。
下面给出的链接:
全柔性器件中的可选I/O标准-KBA86937
HTTP://www. CyPress .COM/FIL/151216/下载
关于当前的消费价值,我需要检查这一点,并回到您确认后。
谢谢,
纳达
以上来自于百度翻译
以下为原文
Hi,
If you select 2.5V LVCMOS I/O standard for your I/O pins, you need to connect PORTSTD[0:1] pins to the 3.3 V supply.
Here VTTL stands for the 3.3 V LVTTL supply itself.
Please review the KBA86937 about Selectable I/O Standards in Full Flex Devices for details.
Also, you can find this information in our FullFlex Dual-Port SRAMs Design Guide (section 2.1).
Links given below:
Selectable I/O Standards in Full Flex Devices – KBA86937
http://www.cypress.com/file/151216/download
Regarding current consumption value, I need to check this and get back to you once confirmed.
Thanks,
Nada
你好,
如果你为你的I/O引脚选择2.5V LVCMOS I/O标准,你需要将PoLTSTD(0:1)引脚连接到3.3伏电源。
这里VTTL代表3.3 V LVTTL电源本身。
请查看KBA86937关于Flex Flex设备中可选I/O标准的详细信息。
此外,您可以在我们的FulfFLX双端口SRAM设计指南(第2.1节)中找到这些信息。
下面给出的链接:
全柔性器件中的可选I/O标准-KBA86937
HTTP://www. CyPress .COM/FIL/151216/下载
关于当前的消费价值,我需要检查这一点,并回到您确认后。
谢谢,
纳达
以上来自于百度翻译
以下为原文
Hi,
If you select 2.5V LVCMOS I/O standard for your I/O pins, you need to connect PORTSTD[0:1] pins to the 3.3 V supply.
Here VTTL stands for the 3.3 V LVTTL supply itself.
Please review the KBA86937 about Selectable I/O Standards in Full Flex Devices for details.
Also, you can find this information in our FullFlex Dual-Port SRAMs Design Guide (section 2.1).
Links given below:
Selectable I/O Standards in Full Flex Devices – KBA86937
http://www.cypress.com/file/151216/download
Regarding current consumption value, I need to check this and get back to you once confirmed.
Thanks,
Nada
举报