m60是否支持OpenGL

当然，我们支持使用GRID的OpenGL。
必须出现其他问题。
能否详细说明你的所作所为。
管理程序版本/ VDI解决方案/ NV驱动程序版本....



以下为原文

For sure we support OpenGL with GRID. The must be something else going wrong. Could you please give some more details what you did. Hypervisor version/VDI solution/NV driver version....

对不起，我刚刚回来，期待未来的电子邮件通知。
我必须对图形卡进行一些更正。
我们实际上有m6网卡，Fat-Clients上有Quadro 5000，Quadro FX4800或Quadro K5000。
以下是基础设施。
HW：cisco UCS B200 M4
图：NVidia M6-0B网格
管理程序：VMWare ESX 6.5
虚拟化：XenDesktop 7.13
VDA客户端：Windows 7（x64）
NVidia驱动程序：NVIDIA图形驱动程序369.71，NVIDIA nView 148.03，NVIDIA WMI 2.27.3
刚收到徕卡的消息，虽然我们正在尝试通过ica（HDX）协议，但该功能需要“Quadro”驱动程序来处理正常的RDP
任何方向，你可以指出我进一步看。
谢谢



以下为原文

Sorry that I'm just coming back, was expecting Email notification that didn't come.

I have to bring in some corrections regarding the graphic cards. We actually have m6 Grid card, and on the Fat-Clients are either Quadro 5000, Quadro FX4800 or Quadro K5000.

Below is the Infrastructure.

HW:               cisco UCS B200 M4
Graphic:          NVidia M6-0B Grid
Hypervisor:       VMWare ESX 6.5
Virtualization:   XenDesktop 7.13
VDA-Client:       Windows 7 (x64)
NVidia Driver:    NVIDIA Graphics Driver 369.71, NVIDIA nView 148.03, NVIDIA WMI 2.27.3

Just got information from Leica that a "Quadro" driver would be required for that function to work on a normal RDP, though we are trying through ica (HDX) protocol

Any direction you could point me to look further.

Thanks

你好
你还没有说出问题是什么？
......“未按预期工作”并未向我们提供任何帮助您的信息。
它是应用程序性能问题还是可视化问题？
查看上面提供的详细信息，您可能需要尝试将vGPU配置文件增加到512MB以上。
使用1Q，2Q，4Q或8Q配置文件然后查看会发生什么。
一旦您使用它，您就可以尝试不同的配置文件以获得最佳体验。
通常，我会完全忽略0B和0Q配置文件，因为它们不允许使用NVenc。
GRID驱动程序以与Quadro相同的方式通过ISV认证，因此这不是您的问题。
问候



以下为原文

Hi

You still haven't said what the problem is? ... "Not working as expected" doesn't give us any information to help you. Is it an application performance issue or is it a visualisation issue?

Looking at the details you've provided above, you may want to try increasing the vGPU profile to more than 512MB. Use a 1Q, 2Q, 4Q or 8Q profile then see what happens. Once you have it working, you can then experiment with different profiles to get the best experience.

Typically, I would just completely ignore the 0B and 0Q profiles, as they do not allow the use of NVenc.

GRID drivers are ISV certified in the same way Quadro are, so this won't be your issue.

Regards

没有图像出现。
问候



以下为原文

No image appears.

Regards