嗨Mahesh，这里有一个很好的在线帮助页面：[http://ena.support.keysight.com/e5052b/manuals/webhelp/eng/?nid=-35185.631410.00&cc=GB&lc=
在搜索字段中键入“带宽”，您应该看到相关的编程命令。
我认为你需要的命令是：SENSE：PN1：ROSC：BAND？
我希望这有帮助。
此致，Simon C.
以上来自于谷歌翻译
以下为原文
Hi Mahesh,
There is an excellent online help page for this product here:
[http://ena.support.keysight.com/e5052b/manuals/webhelp/eng/?nid=-35185.631410.00&cc=GB&lc=eng]
Type 'bandwidth' in the search field and you should see the relevant programming commands.
I think the command you need is therefore:
:SENSE:PN1:ROSC:BAND?
I hope this helps.
Regards, Simon C.
嗨Mahesh，这里有一个很好的在线帮助页面：[http://ena.support.keysight.com/e5052b/manuals/webhelp/eng/?nid=-35185.631410.00&cc=GB&lc=
在搜索字段中键入“带宽”，您应该看到相关的编程命令。
我认为你需要的命令是：SENSE：PN1：ROSC：BAND？
我希望这有帮助。
此致，Simon C.
以上来自于谷歌翻译
以下为原文
Hi Mahesh,
There is an excellent online help page for this product here:
[http://ena.support.keysight.com/e5052b/manuals/webhelp/eng/?nid=-35185.631410.00&cc=GB&lc=eng]
Type 'bandwidth' in the search field and you should see the relevant programming commands.
I think the command you need is therefore:
:SENSE:PN1:ROSC:BAND?
I hope this helps.
Regards, Simon C.
举报
