CCS编译字节储存顺序问题

本帖最后由 一只耳朵怪 于 2018-6-21 10:57 编辑

在编译工程时，遇到如下问题：Endianess not declared!!但在工程的PropertiesGeneral选项卡中的Device Endianness已经设置为little

>> Compilation failuresubdir_rules.mk:30: recipe for target 'main.obj' failed"E:/CCSinstallation/ccs7/ccsv7/tools/compiler/gcc-ARM-none-eabi-4_9-2015q3/arm-none-eabi/include/machine/ieeefp.h", line 428: fatal error #35: #error directive: Endianess not declared!!1 catastrophic error detected in the compilation of "../console_utils_uart.c".Compilation terminated.gmake: *** [console_utils_uart.obj] Error 1"E:/CCSinstallation/ccs7/ccsv7/tools/compiler/gcc-arm-none-eabi-4_9-2015q3/arm-none-eabi/include/machine/ieeefp.h", line 428: fatal error #35: #error directive: Endianess not declared!!1 catastrophic error detected in the compilation of "../main.c".Compilation terminated.
多谢指点