请问CC1310的上拉下拉电阻是多少？

本帖最后由 一只耳朵怪 于 2018-6-6 14:19 编辑

/*
* Application button pin configuration table:
* - Buttons interrupts are configured to trigger on falling edge.
*/
PIN_Config buttonPinTable[] = [
Board_PIN_BUTTON0 | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_NEGEDGE,
Board_PIN_BUTTON1 | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_NEGEDGE,
PIN_TERMINATE
];

我看配置为上拉输入，，这个上拉电阻多少呢？