【OK210试用体验】之第九篇：编译适合ARM平台的RT3070网卡驱动

2015-10-14 18:12:04

L490351555 ( 楼主 ) 2015-10-14 18:12:04 只看该作者 3599 | 0 倒序浏览

本帖最后由 L490351555 于 2015-10-14 18:13 编辑

1. 下载RT3070驱动源码版本：

2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO

2. RT3070驱动修改

解压 #tar -zxvf 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO.tar.gz

进入RT3070_Linux_STA目录，看到有一个README_STA_u***文件，里面介绍了如何加载该驱动,先浏览一下

2.1 先设好环境变量
export PATH=/usr/local/arm/arm-2007q1/bin:$PATH

2.2 makefile修改 (-为去掉设置， +为新加的设置)
#vi makefile

- PLATFORM = PC
+ PLATFORM = IXP
#(选用的是IXP)

ifeq ($(PLATFORM),IXP)

- LINUX_SRC = /project/stable/Gmtek/snapgear-uclibc/linux-2.6.x
- CROSS_COMPILE = arm-linux-
+ LINUX_SRC = /home/rpf413/at91/linux/linux-2.6.30
+ CROSS_COMPILE = /usr/local/arm/arm-2007q1/bin/arm-none-linux-gnueabi-
endif

2.3 /os/linux/config.mk修改
#cd /os/linux/
#vi config.mk

# Support Wpa_Supplicant
- HAS_WPA_SUPPLICANT=n
+ HAS_WPA_SUPPLICANT=y

# Support Native WpaSupplicant for Network Maganger
- HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n
+ HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y

ifeq ($(PLATFORM),IXP)
- WFLAGS += -DRT_BIG_ENDIAN
#加这个选项，模块运行时显示出错，CPU不能工作
endif

ifeq ($(PLATFORM),IXP)

- CFLAGS := -v -D__KERNEL__ -DMODULE -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -mbig-endian -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -Uarm -fno-common -pipe -mapcs-32 -D__LINUX_ARM_ARCH__=5 -mcpu=xscale -mtune=xscale -malignment-traps -msoft-float $(WFLAGS)
- EXTRA_CFLAGS := -v $(WFLAGS) -I$(RT28xx_DIR)/include -mbig-endian
+ EXTRA_CFLAGS := -v $(WFLAGS) -I$(RT28xx_DIR)/include
export CFLAGS
endif

3、编译源码make通过,在2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO/os/linux目录下生成了rt3070sta.ko,也就是RT3070的驱动了

4. 拷贝驱动到目标系统把RT2870STA.dat拷贝到/etc/Wireless/RT2870STA目录下把rt3070sta.ko拷贝到/xxx/ 目录下 xxx自定

5. 加载驱动模块insmod /xxx/rt3070sta.ko

出现以下错误

insmod: error inserting 'rt3070sta.ko': -1 Unknown symbol in module
rt3070sta: Unknown symbol u***_alloc_urb
rt3070sta: Unknown symbol u***_free_urb
rt3070sta: Unknown symbol u***_register
rt3070sta: Unknown symbol u***_put_dev
rt3070sta: Unknown symbol u***_get_dev
rt3070sta: Unknown symbol u***_submit_urb
rt3070sta: Unknown symbol u***_control_msg
rt3070sta: Unknown symbol u***_deregister
rt3070sta: Unknown symbol u***_kill_urb
rt3070sta: Unknown symbol u***_buffer_free
rt3070sta: Unknown symbol u***_buffer_alloc
insmod: cannot insert `rt3070sta.ko': Unknown symbol in module (-1): No such file or directory

原因未加载USB驱动

请修改UTIL/os/linux/u***_main_dev.c文件，在文件的开头加上如下一行程序：

MODULE_LICENSE(“GPL”)

重新编译：

Make ARCH=arm CROSS_COMPILE=/usr/local/arm/arm-2007q1/bin/arm-none-linux-gnueabi-

然后再加载rt3070sta.ko

手动添加：/etc/Wireless/RT2870STA/RT2870STA.dat
insmod /xxx/rt3070sta.ko显示

rtu*** init rt2870 --->

=== pAd = d1af4000, size = 514424 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
u***core: registered new driver rt2870

加载成功

#ifconfig -a 可以查看到ra0设备的存在