【OK210试用体验】Win CE"Hello Forlinx OK210"

freeobst · 2015-8-3 00:05:02

freeobst ( 楼主 ) 2015-8-3 00:05:02 只看该作者 3352 | 4 倒序浏览

今天在开发板上用Win CE输出了Hello Forlinx OK210，是不是很酷！

好了，说一下步骤吧！
1）在vs2005中新建一个Hello Forlinx OK210的C++项目文件
2）输入如下代码：

#include
#include
LRESULT CALLBACK WndProc(HWND hwnd,UINT message,WPARAM wParam,LPARAM lParam);
int WINAPI WinMain(HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPTSTR lpCmdLine,
int nCmdShow)
{
//1.创建一个窗体类
WNDCLASS ws;
ws.cbClsExtra = 0;
ws.cbWndExtra = 0;
ws.hbrBackground = (HBRUSH)GetStockObject(WHITE_BRUSH);
ws.hCursor = NULL;
ws.hIcon = NULL;
ws.hInstance = hInstance;
ws.lpfnWndProc = WndProc;
ws.lpszClassName = TEXT("Hello");
ws.lpszMenuName = NULL;
ws.style = CS_VREDRAW | CS_HREDRAW;
//2.注册窗体类
if (! RegisterClass(&ws)) return -1;
//3.创建窗体
HWND hwnd = CreateWindow(TEXT("Hello"),TEXT("My Forlinx OK21O"),WS_VISIBLE | WS_BORDER | WS_SYSMENU | WS_MINIMIZEBOX | WS_MAXIMIZEBOX | WS_CAPtiON,
300,30,200,150,
NULL,NULL,hInstance,NULL);
//4.更新窗体内容
UpdateWindow(hwnd);
ShowWindow(hwnd,nCmdShow);
MSG msg;
//5.获取系统消息
while(GetMessage(&msg,NULL,0,0))
{
TranslateMessage(&msg);
DispatchMessage(&msg);
}
return 1;
}
LRESULT CALLBACK WndProc(HWND hwnd,UINT message,WPARAM wParam,LPARAM lParam)
{
PAINTSTRUCT ps;
HDC hdc;
RECT rect;
GetClientRect(hwnd,&rect);
if (message == WM_DESTROY)
{
PostQuitMessage(1);
}
if (message == WM_PAINT)
{
hdc = BeginPaint(hwnd,&ps);
DrawText(hdc,TEXT("hello Forlinx OK21O"),-1,&rect,DT_VCENTER | DT_CENTER);
EndPaint(hwnd,&ps);
}
return DefWindowProc(hwnd,message,wParam,lParam);
}

复制代码

3）编译后连接开发板，在开始菜单下Microsoft Visual Studio 2005=Visual Studio Remote Tools=>远程放大镜下就能看到第一个图啦！

注意事项
1：编译在OK210-CE6-SDK(ARMV4不）下编译。
2：开发板上电启动完成后再连接USBOTG线，要在装好驱动的情况下才正确连接开发板，才能在远程放大镜中查看到运行的情况。