在测量期间单击时，SOLVEDSTOP按钮不起作用

你必须使用正确的程序流程。
输入您的代码示例进行分析。
只要您不确保停止按钮也可以使用，您的仪器就会占用您的程序流程。
因此，请参阅菜单中的程序流程按钮，了解您的程序流程是如何....然后再进行一次重复，直到或周期环绕它为止。
或者也检查按钮的属性。
在样本文件夹中有一些关于这个的样本...



     以下为原文

  you have to use correct program flow.
Put in your code sample  to analyze it.
your instrument is occuping your program flow as long as you do not make sure that the stop button has also right to be used.
So check with the program flow button in the menue how you program flow is....and then make an additional repeat until  or On Cycle looop  around it-. or check the properties of your button, too. There are some sampples about this in sample folder ...

感谢您的意见和建议。
请你花些时间看看我的样本程序，这个程序附在这里。
非常感谢您的帮助！
BR，伊柳



     以下为原文

  thank you for your comments and advice.

would you please take your time to have a look at my sample program, which is attached here.

Your help would be highly appreciated!

BR,
Yiliu

附件

• StopButtoneDoesnotFunction.zip16.5 KB
  

同意dBdetlef。
当程序似乎挂起时，单击暂停按钮（运行按钮旁边）。
它应该引导你到挂起的块，然后使用步骤，它应该给你一些提示。
程序中有很多停止按钮，我现在没时间学习。
对于那个很抱歉。
我建议你先尝试一下。
-MK



     以下为原文

  Agree with dBdetlef.
When the program seems to hang, click on the pause button (next to run button). It should lead you to the block that hang, then use the step over and it should give you some hints. 
There are many Stop button in your program and I have no time to study now. Sorry about that. I would suggest you try above first.

-mk

mk，非常感谢你的建议，我会检查我的程序，看看我是否能解决问题。
再次感谢。
抑瘤



     以下为原文

  mk,

thank you very much for the advice, I will check my program to see whether I could get the problem solved.

Thanks again.

Yiliu

只有当“pointtonunber”框完成后，您的停止按钮才有效 - 并且您的问题就出现了。
只有在此对象右侧的所有对象都完成后才能完成。
似乎你永远不会完成它 - 它之前停在其他位置。
通过菜单中的黄色和绿色按钮查看您的程序流程和执行流程 - 您是否了解它们？
然后看一下帮助文件中的传播流程和执行流程说明（Menue-> Help）有传播规则和执行说明。
从上到下，从左到右。
如果右边的所有对象都已完成，则框只能触发“Ping”到底部。
有很多样本可以显示这些基本规则。
但是，要将一个停止按钮设置为紧急按钮，还可以查看示例-contrib / panic开关....



     以下为原文

  Your stop button only works if the box "pointtonunber" or so is finished- and there is your problem.
It is only finished if all pbjects to the right of this objects are finished. And it seems that you never finish it- it is stopped at other location before.

Have a look for your program flow and execution flow with this yellow and green button in the menue- you do know them?
Then have a look in the propagation flow and execution flow explanation in the help file ( Menue-> Help)

There are the rules of propagation and execution explained.

From top to bottom, and left to right. And a box can only trigger a "Ping" to the bottom if all objects to the right are finished.

There are a lot of samples to show these basic rules. But to make a stop button as an emergency button have an additional look at the example -contrib/panic switch ....

嗨dBdetlef，非常感谢您的详细解释。
问题解决了！！
BR，伊柳



     以下为原文

  Hi dBdetlef,

thank you so much for the detailed explanations. 
Problem solved!!

BR,
Yiliu