完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
IDE中的“制作和程序设备主项目”按钮被淡出。我可以通过尝试用没有连接到IDC3的程序来触发这个条件。在点击“Debug Main Project”按钮之后,这个选项会返回。除了启动调试会话,有没有更快的方法返回Make和Build?生出效应意味着什么?IDE的用户指南并没有告诉我关于这个条件的任何东西。
以上来自于百度翻译 以下为原文 The "Make and Program Device Main Project" button is greyed out in the IDE. I can trigger this condition by trying to program with nothing connected to the IDC3. The option comes back after clicking the "Debug Main Project" button. Is there a faster way to being back Make and Build other than starting a debug session? What does the geyed out effect mean? The IDE's user guide doesn't say anything about this condition from what I can tell. Attached Image(s) |
|
相关推荐
5个回答
|
|
如果您没有连接到调试/编程工具的图片,那么“Make and Program”选项没有多大意义,没有任何可编程的。
以上来自于百度翻译 以下为原文 If you have no pic connected to the debug/programmer tool then the "Make and Program" option does not make much sense, there is nothing to program. |
|
|
|
当我按下“生成和编程”按钮时,我得到以下信息:“未找到目标设备(未能检测到目标电压VDD)”。您必须连接到目标设备才能使用ICD3。
以上来自于百度翻译 以下为原文 I get the following message when I press the Make and Program button: 'Target device was not found (could not detect target voltage VDD). You must connect to a target device to use ICD3.' The project builds, the IDE connects to the ICD3, fails to find a target, and the buttons return to 'active' MPLABX 3.40, XC16 1.26, |
|
|
|
在MPLABX V3.40中,按钮不会变灰。我用的是V3.35。升级使问题消失了。它一定是一个微芯片固定的错误。
以上来自于百度翻译 以下为原文 The buttons do not become greyed out in MPLABX v3.40. I was using v3.35. Upgrading makes the problem go away. It must've been a bug that Microchip fixed. Thanks vjasinski. |
|
|
|
灰色的制作和制作和程序设备按钮指示你处于调试模式。如果您退出调试模式,MICKAK和程序设备按钮现在应该是可点击的。
以上来自于百度翻译 以下为原文 Greyed out Make and Make and Program Device buttons indicates that you are in Debug mode. If you exit Debug Mode, the Make and Program Device buttons should now be clickable. |
|
|
|
对不起,屏幕截图,我无法访问这个论坛线程。微笑:
以上来自于百度翻译 以下为原文 Sorry for screen shot I was not having access to put on this forum thread.Smile: |
|
|
|
只有小组成员才能发言,加入小组>>
4824 浏览 9 评论
1829 浏览 8 评论
1747 浏览 10 评论
请问是否能把一个ADC值转换成两个字节用来设置PWM占空比?
2954 浏览 3 评论
请问电源和晶体值之间有什么关系吗?PIC在正常条件下运行4MHz需要多少电压?
2059 浏览 5 评论
460浏览 1评论
1110浏览 1评论
PIC Kit3出现目标设备ID(00000000)与预期的设备ID(02c20000)不匹配。是什么原因
362浏览 0评论
263浏览 0评论
LAN9252使用SQI通信,进行数字复位后读BYTE_TEST异常
1796浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-4-24 04:53 , Processed in 1.073149 second(s), Total 77, Slave 61 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号