STM32皮质M0中的运动控制如何工作的？

Ciao Motor
 
 
 您可以在ST库存中找到基于STM32F0的评估板是http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1199/PF259717?s_searchtype=partnumber
 
 但到目前为止STM32 PMSM FOC SDK电机控制固件库http://www.st.com/web/catalog/tools/FM147/CL1794/SC961/SS1743/LN1734/PF257936?s_searchtype=partnumber
 支持'开箱即用'STM320518-EVAL，现在已经不再有库存。
 我们计划在下一版SDK中扩展STM32072B-EVAL的支持。
 
 再见
 梁咏琪



以下为原文





Ciao Motor


The evaluation board that you can find in the ST stock that is based on STM32F0 is the http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1199/PF259717?s_searchtype=partnumber

but up to now the STM32 PMSM FOC SDK motor control firmware library http://www.st.com/web/catalog/tools/FM147/CL1794/SC961/SS1743/LN1734/PF257936?s_searchtype=partnumber
support ''out-of-the-box'' the STM320518-EVAL, the older one that is now no more at stock.
We plan to extend the support of the STM32072B-EVAL in the next release of the SDK.

Ciao
Gigi

非常感谢，吉吉。
 
 
 我查了http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1199/PF259717?s_searchtype=partnumber
，但它看起来不支持电机控制友好。由于此EVM中不包含主电路（整流器）。在选择主电路时我还需要谨慎吗？
 此外，这是否更容易使用直接连接到主电路的发现套件？
 http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/PF253215?sc=internet/evalboard/product/253215.jsp
 
 很高兴听到ST将用FOC支持STM32072B-EVAL。我们什么时候可以使用？



以下为原文





Thanks a lot, Gigi.


I checked http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1199/PF259717?s_searchtype=partnumber
, but it doesn't look to support motor control friendly. Since there is no main circuits (rectifier) included on this EVM. what else I need to be cautious when choosing a main circuit?  
Also, Is this easier to use discovery kit directly connected to main circuit?  
  http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/PF253215?sc=internet/evalboard/product/253215.jsp

It is great to hear that ST is going to support STM32072B-EVAL with FOC. When do we expect to be available?

Ciao Motor
 
 
 我不知道我是否抓住了你的问题。要构建电机控制系统，您有两种选择：
 
  - 安排带有控制板和电源板的系统
  - 尝试使用单板方法
 
 首先，您可以灵活地选择微型计算能力+逆变器的功率大小。
 STM32072B-EVAL只是一个控制板，您必须将它与ST库存中的任何电源板（STEVAL-IHM0xx）结合使用。
 
 FOC SDK不支持发现套件，因为板上没有34针MC连接器，所以无法与电源板连接。
 
 FOC SDK的下一个版本将支持STM32072B-EVAL，计划于2015年第一季度推出
 
 再见
 梁咏琪



以下为原文





Ciao Motor


I don't know if I catch your question. To build a motor control system you have two choice:

- Arrange a system with a Control Board plus a Power Board
- Try with a single board approach

With the first you have the flexibility to choose the computational power of the micro + the power size of the inverter.
The STM32072B-EVAL is just a control board and you have to combine it with any power board (STEVAL-IHM0xx) present in the ST stock.

Discovery kit is not supported by the FOC SDK and can't be connected with the power board because there is no 34pin MC connector onboard.

The next release of the FOC SDK will support the STM32072B-EVAL and is planned for Q1 '15

Ciao
Gigi