完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
我正在寻找--Akilent-- Keysight示波器的建议“盒子”,但找不到一个,所以我会在这里发布。
我经常发现在*触发菜单*上更改触发选项时,可以方便地在* auto / normal *之间临时交换触发*模式*。 这样可以看到波形并使调整更容易。 当然,这假设我通常将* DSO置于* Normal *模式,否则它没有实际意义。 要做到这一点,需要更改为不同的菜单,然后返回* Trigger *菜单进行调整。 触发菜单只有三个选项 - 可以在Trigger菜单上复制一些Mode菜单选项。 我建议*模式*和*耦合*。 无论如何这是建议。 我很感激评论这是一个好主意以及如何“正式”提出它。 再见 以上来自于谷歌翻译 以下为原文 I was looking for a suggestion 'box' for the --Agilent-- Keysight oscilloscopes but couldn't find one so I'll post here. I find that quite often when changing trigger options on the *Trigger Menu* it is convenient to temporarily swap the trigger *Mode* between *auto/normal*. This allows the waveform to be seen and makes adjustment easier. This assumes, of course, that I usually have the DSO in *Normal* mode otherwise it's moot. To do this involves changing to a different menu and then returning to the *Trigger* menu to make the adjustment. The trigger menu has only three options - It would be possible to duplicate a few of the Mode menu options on the Trigger menu. I would suggest *Mode* and *Coupling*. Anyway that's the suggestion. I would appreciate comments on whether it's a good idea and how to "officially" suggest it. bye |
|
相关推荐
2个回答
|
|
问候。
Quick Action可以实现您的需求。 - 按[Utility]> Quick Action> Action - 选择“Quick Trigger Mode” - 从那时起,前面板上的[Quick Action]硬键可用于从任何菜单快速切换Trigger Mode。 以上来自于谷歌翻译 以下为原文 Greetings. What you need can be achieved with Quick Action. - Press [Utility] > Quick Action > Action - Select "Quick Trigger Mode" - From then on, the [Quick Action] hardkey on the Front Panel can be used to quickly toggle the Trigger Mode from any menu. |
|
|
|
qksorl1994 发表于 2018-9-11 12:30 嗨inf_persistence,感谢您的出色建议。 但是......我仍然认为我的建议是一个好主意,可以让QA按钮自由地进行另一个动作,并且没有我能想到的缺点。 再见 以上来自于谷歌翻译 以下为原文 Hi inf_persistence , Thanks for the excellent suggestion. But.. I still think my suggestion would be a good idea that would leave the QA button free for another action and has no downside that I can think of. bye |
|
|
|
只有小组成员才能发言,加入小组>>
2082 浏览 1 评论
1845 浏览 1 评论
1700 浏览 5 评论
2563 浏览 3 评论
将设备连接到PC并通过asic格式读取数据然后我的网络分析仪挂起
1546 浏览 4 评论
关于Keysight x1149 Boundary Scan Analyzer
349浏览 0评论
1385浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
261浏览 0评论
2248浏览 0评论
1102浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-3-28 16:41 , Processed in 1.138420 second(s), Total 46, Slave 40 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号