vrf Tektronix CSA8000示波器

约翰，不知道那种乐器，而是一种经验。
即使所有其他工作正常，旧的或简单的仪器通常也不响应* IDN。保留-----原始消息-----来自：owner-vrf@lvld.agilent.com [mailto：owner-vrf @ lvld。
agilent.com] OnBehalf Of Cahill，John（John）发送：2002年6月6日星期四上午10:36致：'vrf@lvld.agilent.com'Cc：Farry，Anthony T（Anthony）主题：vrf Tektronix CSA8000 scopeHi，
我有一个带有80C02-CR光模块的Tektronix CSA8000示波器。
不需要用它进行STM16模板测试，也需要对光信号进行消光测试。
有没有人有HPVEE代码样本可能有帮助吗？另外，对于仪器的GPIB字符串，是否有关于行终止字符等的古怪/非标准？
我甚至不能让这个简单的* IDN响应？
此刻声明。谢谢.Regards，John Cahill测试工程师，朗讯科技公司，Blanchardstown工业园区，Blanchardstown，Dublin 15，Ireland电话：+353 1 8864734 -----------------
--------------------------------------------------
- 这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
--------------------------------------------------
-----------------------------------这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  John,

Don't know that instrument, but a piece of experience. Older or simple
instruments often do not respond to *IDN even though all else is working.

Paul

-----Original Message-----
From:     owner-vrf@lvld.agilent.com [mailto:owner-vrf@lvld.agilent.com] On
Behalf Of Cahill, John (John)
Sent:     Thursday, June 06, 2002 10:36 AM
To:     [email=]'vrf@lvld.agilent.com[/email]'
Cc:     Farry, Anthony T (Anthony)
Subject:     vrf Tektronix CSA8000 scope

Hi,

I've got a Tektronix CSA8000 scope with an 80C02-CR optical module in it. I
need to do STM16 mask testing with it and also an extinction ratio
measurement on an optical signal. Does anyone have a HPVEE code sample that
might help?

Also, is there anything quirky/non standard as regards line termination
characters etc. for GPIB strings for the instrument ? I can't even get the
beast to respond to a simple *IDN? statement at the moment.

Thanks in advance.

Regards,
John Cahill

Test Engineer,
Lucent Technologies,
Blanchardstown Industrial Park,
Blanchardstown,
Dublin 15,
Ireland

phone: +353 1 8864734
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

约翰，不知道那种乐器，而是一种经验。
即使所有其他工作正常，旧的或简单的仪器通常也不响应* IDN。保留-----原始消息-----来自：owner-vrf@lvld.agilent.com [mailto：owner-vrf @ lvld。
agilent.com] OnBehalf Of Cahill，John（John）发送：2002年6月6日星期四上午10:36致：'vrf@lvld.agilent.com'Cc：Farry，Anthony T（Anthony）主题：vrf Tektronix CSA8000 scopeHi，
我有一个带有80C02-CR光模块的Tektronix CSA8000示波器。
不需要用它进行STM16模板测试，也需要对光信号进行消光测试。
有没有人有HPVEE代码样本可能有帮助吗？另外，对于仪器的GPIB字符串，是否有关于行终止字符等的古怪/非标准？
我甚至不能让这个简单的* IDN响应？
此刻声明。谢谢.Regards，John Cahill测试工程师，朗讯科技公司，Blanchardstown工业园区，Blanchardstown，Dublin 15，Ireland电话：+353 1 8864734 -----------------
--------------------------------------------------
- 这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
--------------------------------------------------
-----------------------------------这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  John,

Don't know that instrument, but a piece of experience. Older or simple
instruments often do not respond to *IDN even though all else is working.

Paul

-----Original Message-----
From:     owner-vrf@lvld.agilent.com [mailto:owner-vrf@lvld.agilent.com] On
Behalf Of Cahill, John (John)
Sent:     Thursday, June 06, 2002 10:36 AM
To:     [email=]'vrf@lvld.agilent.com[/email]'
Cc:     Farry, Anthony T (Anthony)
Subject:     vrf Tektronix CSA8000 scope

Hi,

I've got a Tektronix CSA8000 scope with an 80C02-CR optical module in it. I
need to do STM16 mask testing with it and also an extinction ratio
measurement on an optical signal. Does anyone have a HPVEE code sample that
might help?

Also, is there anything quirky/non standard as regards line termination
characters etc. for GPIB strings for the instrument ? I can't even get the
beast to respond to a simple *IDN? statement at the moment.

Thanks in advance.

Regards,
John Cahill

Test Engineer,
Lucent Technologies,
Blanchardstown Industrial Park,
Blanchardstown,
Dublin 15,
Ireland

phone: +353 1 8864734
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

> * IDN？
是一个SCPI命令。
如果仪器不能说SCPI>它将无法工作。实际上，* IDN？
是IEEE 488.2命令。
有相当数量的仪器488.2不是SCPI.Jay Nemeth-Johannes完成测试和测量系统PO Box 6Loveland，Colorado 80539Jay.Johannes@completetest.com-----------------
--------------------------------------------------
- 这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  >*IDN? is a SCPI command. If the instrument deos not speak SCPI
>it won't work.

Actually, *IDN? Is an IEEE 488.2 command. There are a fair number of
instruments which are 488.2 which are not SCPI.

Jay Nemeth-Johannes
Complete Test and Measurement Systems
PO Box 6
Loveland, Colorado 80539
Jay.Johannes@completetest.com


---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

> * IDN？
是一个SCPI命令。
如果仪器不能说SCPI>它将无法工作。实际上，* IDN？
是IEEE 488.2命令。
有相当数量的仪器488.2不是SCPI.Jay Nemeth-Johannes完成测试和测量系统PO Box 6Loveland，Colorado 80539Jay.Johannes@completetest.com-----------------
--------------------------------------------------
- 这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  >*IDN? is a SCPI command. If the instrument deos not speak SCPI
>it won't work.

Actually, *IDN? Is an IEEE 488.2 command. There are a fair number of
instruments which are 488.2 which are not SCPI.

Jay Nemeth-Johannes
Complete Test and Measurement Systems
PO Box 6
Loveland, Colorado 80539
Jay.Johannes@completetest.com


---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

嗨，我有一个带有80C02-CR光模块的Tektronix CSA8000示波器。
我需要用它进行STM16模板测试，并对光信号进行消光比测量。
有没有人有可能有帮助的HPVEE代码示例？另外，对于仪器的GPIB字符串，是否有关于行终止字符等的古怪/非标准？
我甚至无法让野兽回应简单的* IDN？
此刻声明。谢谢.Regards，John Cahill测试工程师，朗讯科技公司，Blanchardstown工业园区，Blanchardstown，Dublin 15，Ireland电话：+353 1 8864734 -----------------
--------------------------------------------------
- 这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  Hi,

I've got a Tektronix CSA8000 scope with an 80C02-CR optical module in it. I need to do STM16 mask testing with it and also an extinction ratio measurement on an optical signal. Does anyone have a HPVEE code sample that might help?

Also, is there anything quirky/non standard as regards line termination characters etc. for GPIB strings for the instrument ? I can't even get the beast to respond to a simple *IDN? statement at the moment.

Thanks in advance.

Regards,
John Cahill

Test Engineer,
Lucent Technologies,
Blanchardstown Industrial Park,
Blanchardstown,
Dublin 15,
Ireland

phone: +353 1 8864734
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

嗨，我有一个带有80C02-CR光模块的Tektronix CSA8000示波器。
我需要用它进行STM16模板测试，并对光信号进行消光比测量。
有没有人有可能有帮助的HPVEE代码示例？另外，对于仪器的GPIB字符串，是否有关于行终止字符等的古怪/非标准？
我甚至无法让野兽回应简单的* IDN？
此刻声明。谢谢.Regards，John Cahill测试工程师，朗讯科技公司，Blanchardstown工业园区，Blanchardstown，Dublin 15，Ireland电话：+353 1 8864734 -----------------
--------------------------------------------------
- 这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  Hi,

I've got a Tektronix CSA8000 scope with an 80C02-CR optical module in it. I need to do STM16 mask testing with it and also an extinction ratio measurement on an optical signal. Does anyone have a HPVEE code sample that might help?

Also, is there anything quirky/non standard as regards line termination characters etc. for GPIB strings for the instrument ? I can't even get the beast to respond to a simple *IDN? statement at the moment.

Thanks in advance.

Regards,
John Cahill

Test Engineer,
Lucent Technologies,
Blanchardstown Industrial Park,
Blanchardstown,
Dublin 15,
Ireland

phone: +353 1 8864734
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

“Paul H. Rubin”写道：>约翰，>>不知道那种乐器，而是一种经验。
旧的或简单的>工具通常不会响应* IDN，即使其他所有工作都正常。错误* IDN？
是一个SCPI命令。
如果仪器不能说SCPIit将无法工作.Stan -------------------------------------
------------------------------------- Stan Bischof安捷伦科技公司707-577-3994 stan_bischof @ agilent。
COM -------------------------------------------------
--------------------------------------------------
--------------------------------------------这是“vrf”
maillist，由Majordomo管理。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  "Paul H. Rubin" wrote:
> John,
>
> Don't know that instrument, but a piece of experience. Older or simple
> instruments often do not respond to *IDN even though all else is working.

correct

*IDN? is a SCPI command. If the instrument deos not speak SCPI
it won't work.

Stan


--------------------------------------------------------------------------
Stan Bischof  Agilent Technologies  707-577-3994  stan_bischof@agilent.com
--------------------------------------------------------------------------
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

“Paul H. Rubin”写道：>约翰，>>不知道那种乐器，而是一种经验。
旧的或简单的>工具通常不会响应* IDN，即使其他所有工作都正常。错误* IDN？
是一个SCPI命令。
如果仪器不能说SCPIit将无法工作.Stan -------------------------------------
------------------------------------- Stan Bischof安捷伦科技公司707-577-3994 stan_bischof @ agilent。
COM -------------------------------------------------
--------------------------------------------------
--------------------------------------------这是“vrf”
maillist，由Majordomo管理。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  "Paul H. Rubin" wrote:
> John,
>
> Don't know that instrument, but a piece of experience. Older or simple
> instruments often do not respond to *IDN even though all else is working.

correct

*IDN? is a SCPI command. If the instrument deos not speak SCPI
it won't work.

Stan


--------------------------------------------------------------------------
Stan Bischof  Agilent Technologies  707-577-3994  stan_bischof@agilent.com
--------------------------------------------------------------------------
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

你试过“身份证”吗？
从您的CSA8000获取ID字符串？
我相信CSA比我怀疑符合TC＆amp; F（Tektronix代码和格式）的11800要多一点。
ID查询与SCPI略有不同，但TC＆amp; F和11k系列都在SCPI之前进行了比较，因此大多数Tek装备从80年代中后期开始直到最近必须符合内部规格。
泰克代码和格式。
Letme知道你是否有更多的麻烦，我会看到我可以帮忙.Ron .-------------------------------
--------------------------------------这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  Have you tried "ID?" to get the ID string from
your CSA8000?  I believe the CSA is little more
than the 11800 which I suspect conforms to TC&F
(Tektronix Codes and Formats).  The ID query is
a bit different than SCPI but then both TC&F and
the 11k series pre-dates SCPI so most Tek gear
from some time in the mid to late '80's till
relatively recently had to conform to the internal
spec., e.g. Tektronix Codes and Formats.  Let
me know if you have more trouble and I'll see
if I can help out.

Ron.
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

你试过“身份证”吗？
从您的CSA8000获取ID字符串？
我相信CSA比我怀疑符合TC＆amp; F（Tektronix代码和格式）的11800要多一点。
ID查询与SCPI略有不同，但TC＆amp; F和11k系列都在SCPI之前进行了比较，因此大多数Tek装备从80年代中后期开始直到最近必须符合内部规格。
泰克代码和格式。
Letme知道你是否有更多的麻烦，我会看到我可以帮忙.Ron .-------------------------------
--------------------------------------这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  Have you tried "ID?" to get the ID string from
your CSA8000?  I believe the CSA is little more
than the 11800 which I suspect conforms to TC&F
(Tektronix Codes and Formats).  The ID query is
a bit different than SCPI but then both TC&F and
the 11k series pre-dates SCPI so most Tek gear
from some time in the mid to late '80's till
relatively recently had to conform to the internal
spec., e.g. Tektronix Codes and Formats.  Let
me know if you have more trouble and I'll see
if I can help out.

Ron.
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

嗨，您是否拥有CSA8000的最新固件升级。
它应该是1.3.3。
并可以从互联网上下载。
第一个固件中存在许多错误，这些错误会给出IEEE问题和“无响应”问题。
我使用CSA8000时没有出现HPVE和Direct I / O问题。对于直接I / O设置，请参阅Word附件。（参见附件：DirectIO.doc）有关Direct I / O命令的示例，请参阅HPVEE的附件
示例文件。（参见附件：DirectIO.vee）问候，Henny Bouman“Cahill，John（John）”致：“'vrf@lvld.agilent.com'”com>（密送：Henny Bouman / NYM / SC / PHILIPS
）发送者：主题：vrf Tektronix CSA8000示波器所有者-vrf@lvld.a gilent.com分类：06-06-02 16:35嗨，我有一个带有80C02-CR光模块的Tektronix CSA8000示波器。
我需要用它进行STM16模板测试，并对光信号进行消光比测量。
有没有人有可能有帮助的HPVEE代码示例？另外，对于仪器的GPIB字符串，是否有关于行终止字符等的古怪/非标准？
我甚至无法让野兽回应简单的* IDN？
此刻声明。谢谢.Regards，John Cahill测试工程师，朗讯科技公司，Blanchardstown工业园区，Blanchardstown，Dublin 15，Ireland电话：+353 1 8864734 -----------------
--------------------------------------------------
- 这是由Majordomo管理的“vrf”maillist。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  Hi,

Do you have the latest firmware upgrade for the CSA8000. It should be 1.3.3. and can be download from the internet. There are many bugs in the first firmware which gives IEEE problems and "Not Responding" problems. I use the CSA8000 without problems with
HPVEE and Direct I/O.

For the Direct I/O settings see the Word attachement.

(See attached file: DirectIO.doc)

For an example of the Direct I/O commands see the attachement of the HPVEE Example file.

(See attached file: DirectIO.vee)

Regards,
Henny Bouman




                                                                                                                                                      
                      "Cahill, John                                                                                                                   
                      (John)"                      To:  "'vrf@lvld.agilent.com'"                                                
                                                                     
                      com>                          (bcc: Henny Bouman/NYM/SC/PHILIPS)                                                                
                      Sent by:                     Subject:   vrf Tektronix CSA8000 scope                                                             
                      owner-vrf@lvld.a                                                                                                                
                      gilent.com                   Classification:                                                                                    
                                                                                                                                                      
                                                                                                                                                      
                      06-06-02 16:35                                                                                                                  
                                                                                                                                                      
                                                                                                                                                      




Hi,

I've got a Tektronix CSA8000 scope with an 80C02-CR optical module in it. I need to do STM16 mask testing with it and also an extinction ratio measurement on an optical signal. Does anyone have a HPVEE code sample that might help?

Also, is there anything quirky/non standard as regards line termination characters etc. for GPIB strings for the instrument ? I can't even get the beast to respond to a simple *IDN? statement at the moment.

Thanks in advance.

Regards,
John Cahill

Test Engineer,
Lucent Technologies,
Blanchardstown Industrial Park,
Blanchardstown,
Dublin 15,
Ireland

phone: +353 1 8864734
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------