完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
*信号发生器基础知识和新应用的问题与解答* 2013年1月30日的网络直播问题:您是否可以调整信号发生器的PLL BW以优化相位噪声?
以上来自于谷歌翻译 以下为原文 Questions and Answers to *Signal Generator Fundamentals and New Applications* Webcast on 30 January 2013 Question: Can you adjust the signal generator’s PLL BW to optimize for phase noise? |
|
相关推荐
1个回答
|
|
答:这取决于信号发生器。
在许多型号上,PLL带宽设计为无法调整。 但是某些型号(例如PSG)确实允许用户为参考振荡器选择五种不同带宽中的一种。 此外,带选件UNY的PSG单元在合成器部分提供两个PLL带宽。 这使用户能够针对150 kHz的偏移优化相位噪声。 以上来自于谷歌翻译 以下为原文 Answer: It depends on the signal generator. On many models, the PLL bandwidth is designed in and cannot be adjusted. But some models, such as the PSG, do allow the user to select one of five different bandwidths for the reference oscillator. Additionally, PSG units with option UNY offer two PLL bandwidths in the synthesizer section. This enables the user to optimize phase noise for offsets 150 kHz. |
|
|
|
只有小组成员才能发言,加入小组>>
2082 浏览 1 评论
1846 浏览 1 评论
1700 浏览 5 评论
2563 浏览 3 评论
将设备连接到PC并通过asic格式读取数据然后我的网络分析仪挂起
1547 浏览 4 评论
关于Keysight x1149 Boundary Scan Analyzer
350浏览 0评论
1386浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
262浏览 0评论
2248浏览 0评论
1103浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-3-29 22:23 , Processed in 0.969117 second(s), Total 72, Slave 56 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号