完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
大家好,
目前,我们正在开发基于安全微控制器的产品,用于安全关键应用。 我们希望将Flexray通信转换为光纤单模通信以实现更长距离 转换器/驱动程序是否可以进行此转换? 在我的硬件设计中需要注意哪些必要的事项? 请提供宝贵的反馈意见。 谢谢。 问候, S.Saravanakumar 以上来自于谷歌翻译 以下为原文 Hello All, Currently, We are developing a product based up on Safe Microcontroller for safety critical application. We want to convert the Flexray communication to Optical Fiber single mode communication for longer distance Is this conversion possible with out Transceivers/Drivers? What are the necessary things to take care during my hardware design? Kindly give your valuable feedback. Thank you. Regards, S.Saravanakumar |
|
相关推荐
3个回答
|
|
你好 ,
对于Flexray IP微控制器, 你可以使用SPC56EL http://www.st.com/content/ccc/resource/sales_and_marketing/promotional_material/brochure/group0/ab/e8/ff/0b/65/1d/41/8e/SPC56%2032-bit%20power%20architecture% 20microcontrollers /文件/ brspc56.pdf / JCR:内容/翻译/ en.brspc56.pdf 对于光纤,您需要一个外部设备。 也许这个, http://www.st.com/en/interfaces-and-transceivers/serc816.html 最好的祝福 二万 以上来自于谷歌翻译 以下为原文 Hello , For the Flexray IP microcontroller, you can use SPC56EL http://www.st.com/content/ccc/resource/sales_and_marketing/promotional_material/brochure/group0/ab/e8/ff/0b/65/1d/41/8e/SPC56%2032-bit%20power%20architecture%20microcontrollers/files/brspc56.pdf/jcr:content/translations/en.brspc56.pdf For the optical fiber, you need an external device. Maybe this one , http://www.st.com/en/interfaces-and-transceivers/serc816.html Best regards Erwan |
|
|
|
你好,Erwan,
我已经选择了具有Flexray通信功能的微控制器。 我的问题是,直接将柔性传输通信转换为光纤通信。 按照建议,这个接口控制器可以吗? /external-link.jspa?url=http%3A%2F%2Fwww.st.com%2Fen%2Finterfaces-and-transceivers%2Fserc816.html 问候, S.Saravanakumar 注意:原始帖子包含大量线程对话,只能迁移到第9级 以上来自于谷歌翻译 以下为原文 Hello Erwan, Already, I have selected the microcontroller, which has Flexray communication. My question about, Directly convert the flexray communication to optical fiber communication. As recommended, is it possible with this Interface controller ?? /external-link.jspa?url=http%3A%2F%2Fwww.st.com%2Fen%2Finterfaces-and-transceivers%2Fserc816.html Regards, S.Saravanakumar Note: the original post contained a large number of threaded conversations and was only able to be migrated to the 9th level |
|
|
|
你好
S.Saravanakumar, 我不是光纤通信的专家。 不要犹豫,在OLS工具中发布支持请求 最好的祝福 二万 以上来自于谷歌翻译 以下为原文 Hello S.Saravanakumar , i am not expert of Optical Fiber communication. do not hesitate to post a support request in OLS Tools Best regards Erwan |
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
1408 浏览 1 评论
2058 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1507 浏览 1 评论
2803 浏览 6 评论
5186 浏览 21 评论
351浏览 4评论
503浏览 4评论
在Linux上安装Atollic TRUEStudio的步骤有哪些呢?
276浏览 3评论
使用DMA激活某些外设会以导致外设无法工作的方式生成代码是怎么回事
552浏览 3评论
479浏览 3评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-4-19 23:11 , Processed in 0.893816 second(s), Total 70, Slave 61 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号