完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
我尝试使用以下参数模拟脉冲pwm驱动LED:波形:脉冲频率:200Hz高电平:3V低电平:0VDuty周期:50%边沿时间:9ns(两者)调制类型:PWMSource:InternalDuty周期偏差:40%形状
:TrianglePWM频率:1Hz在调制脉冲波时,我注意到了辍学。 脉冲波缺失一个脉冲。 这种情况会随着调制频率(1Hz)而定期发生。设备:33522AFirmware版本1.11 tek00000.png24.1 KB 以上来自于谷歌翻译 以下为原文 I've tried to simulate a pulsing pwm-driven LED with these parameters: Waveform: Pulse Frequency: 200Hz High Level: 3V Low Level: 0V Duty Cycle: 50% Edge time: 9ns (both) Modulation Type: PWM Source: Internal Duty Cycle Deviation: 40% Shape: Triangle PWM Frequency: 1Hz While modulating the pulse wave, i noticed dropouts. The pulse wave is missing a pulse. This happens periodically with the modulation frequency (1Hz). Device: 33522A Firmware Version 1.11 附件
|
|
相关推荐
1个回答
|
|
这应该在新的固件版本中修复,你可以在这里下载:http://www.home.agilent.com/agilent/editorial.jspx?cc = US& lc = eng& ckey = 1974550& nid = -536902257.940638
和ID = 1974550 以上来自于谷歌翻译 以下为原文 This should be fixed in the new firmware release, you can download it here: http://www.home.agilent.com/agilent/editorial.jspx?cc=US&lc=eng&ckey=1974550&nid=-536902257.940638&id=1974550 |
|
|
|
只有小组成员才能发言,加入小组>>
2099 浏览 1 评论
1854 浏览 1 评论
1714 浏览 5 评论
2581 浏览 3 评论
将设备连接到PC并通过asic格式读取数据然后我的网络分析仪挂起
1560 浏览 4 评论
502浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
363浏览 0评论
1411浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
272浏览 0评论
2258浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-4-25 09:21 , Processed in 1.205417 second(s), Total 75, Slave 59 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号