完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
你好,
IPM模块STGIPQ3H60T内置NTC。如何使用内置NTC为FO?-SDK配置温度传感? 谢谢, 阿尔乔姆 #foc-sdk#temperature-sensing#build-in-ntc 以上来自于谷歌翻译 以下为原文 Hello, IPM module STGIPQ3H60T has build-in NTC. How to configure the temperature sensing with build-in NTC for the FO?-SDK? Thank you, Artem #foc-sdk #temperature-sensing #build-in-ntc |
|
相关推荐
1个回答
|
|
亲爱的阿尔乔姆,
不幸的是,FOC SDK不支持负斜率。它将在后面添加。 目前,您可以使用虚拟温度传感器(它将始终发送25度)用于调试目的。 问候 塞德里克 以上来自于谷歌翻译 以下为原文 Dear Artem, Unfortunately, the FOC SDK does not support yet negative ramp. It will be added latter. For the time being, you can use virtual temperature sensor (it will send always 25 deg) for debug purpose. Regards Cedric |
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
1408 浏览 1 评论
2058 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1507 浏览 1 评论
2803 浏览 6 评论
5186 浏览 21 评论
351浏览 4评论
503浏览 4评论
在Linux上安装Atollic TRUEStudio的步骤有哪些呢?
276浏览 3评论
使用DMA激活某些外设会以导致外设无法工作的方式生成代码是怎么回事
561浏览 3评论
479浏览 3评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-4-20 02:45 , Processed in 0.791665 second(s), Total 71, Slave 58 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号